Ceramic brick thermal shock resistance tester is suitable for the measurement of ceramic brick thermal shock resistance of special equipment, the instrument meets the requirements of GB/T3810.9-2006/ISO10545-9:1994 IDT ceramic brick thermal shock resistance measurement, according to the size of the ceramic brick water absorption, can use immersion method and non-immersion method of the test.

Criteria:

Low GB/T3810.9-2006

Low ISO10545-4, 94

Low ASTM C484

★ Technical parameters:

1. Maximum working temperature of furnace body: 400℃;

2, effective volume: 600×600×600mm; 300 * 300 * 300 mm; 350×350×350mm one of three specifications

3, temperature error: ±1℃;

4, temperature control accuracy: ±1℃ (300℃);

5, cold furnace heating time: 60 minutes (from room temperature -400℃);

6, cold feed into the furnace temperature rise time: 5 minutes (300℃, feed weight 50kg);

7, overall size: 1500×1600×850mm;

8, water tank temperature control range: 15-50℃;

9, temperature control accuracy: ±1℃;

10, water temperature unevenness: ±1℃;

11, hot material into water within 5 minutes of temperature rise: ±1℃ (material temperature 300℃, 7kg);

12, the maximum power consumption of heating furnace: 6kw;

13. Maximum power consumption of water heater: 6kw;

14, compressor power: 2.2kw;

15, timer range: 0 ~ 120 (180) minutes.

Test mode: Complete the test cycle automatically according to the set test times. Test water recycling.

The thermal shock resistance tester of ceramic brick is equipped with electric feeding transmission device.

Ambient temperature: 0 ~ 40 ° C

Working power supply: 3×220V, 10kw,50Hz

Inlet temperature of cooling water: below 35℃