Brand: BENTLY 

Type:3500/05-02-04-00-00-00

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Using the engineering tool Control Builder, it is possible to configure hardware (I/O and communication units) and make application programs with control languages according to IEC 61131-3. Programs can be compiled and run off-line as an aid to process simulation before finally downloading an application to the controller. The Control Builder offers a set of options, each with its own set of properties. Simply select the option that is closest to system requirements. • Control Builder documentation – for configuration information • Control Software documentation – for available functionality. Control Builder Online Help provides detailed step-by-step information when creating an application for the AC 800M Controller.

The Control Builder is installed in a PC that is normally connected to the AC 800M Controller via the Control Network and the CN1 or CN2 ports on the controller (see Figure 53 on page 153). Alternatively, the Control Builder may be connected via the COM4 port (RS-232C) on the AC 800M Controller. Use the tool cable TK212 and a serial port on the PC. In redundant configuration, the Control Builder is connected to the Primary CPU COM4 port. The Backup CPU cannot communicate with Control Builder. PM851/PM851A is restricted to one Ethernet (CN1) port, thus redundant Ethernet is not available. Control Builder as standard does not support CI862. If CI862 is to be used suitable system extension must be installed. To use the FF HI functionality, upgrade the firmware of CI852 unit by using Serial Firmware Upgrade Tool. The Serial Firmware Upgrade Tool loads the special firmware with FF HI functionality to the Controller. Manually browse the folder, ..FirmwareFilesSC860rFFHI in the Serial Firmware Upgrade Tool and select firmware.ext.

Control Network is a private IP network domain for both real time data and general system communication between industrial computers. It is scalable, from a very small network with a few nodes, to a large network containing a number of “Network Areas” and many hundreds of nodes.