HIMA EABT3 B9302
USD $1150 - $2050 /Piece
Min.Order:1 Piece
Temporal Ming sheng automation equipment co., LTD
Brand:HIMA
Type:EABT3 B9302
Origin: the United States
Warranty: 365 days
Colour: new/used
Shipping method: Courier delivery
Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,
Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts
The CI862 is in the process of being restarted or configured. Allow time for this to finalize. If the condition persists, and all other units on the CEXbus have non-illuminated LEDs: • Check that a valid HW configuration including the CI862 is downloaded to the controller. • Check the CEX-bus fuse inside the PM8xx processor unit. • Initiate a reset signal (INIT) from the PM8xx processor unit. • Replace the CI862. F(ault) LED is ON Check that the CI862 is in the process of being restarted. Allow time for this to finalize. Check that there is no configuration fault reported from CI862 in CBM.If the status remains, initiate a reset signal (INIT) from the PM8xx processor unit. If the status still remains after the reset replace the CI862. COMM ERROR LED is ON Field Bus Communication Error from the µGenie slave module. PRIM LED is OFF The CI862 is in the process of being restarted or configured. Allow time for this to finalize. Check that there is no configuration fault reported from CI862 in CBM. DUAL LED is OFF on both CI862’s The CI862 is in the process of being restarted or configured. Allow time for this to finalize. Check that the redundancy for this module is set within CBM and the configuration is downloaded.
The CI865 unit is in the process of being configured. Allow time for this to finalize. If the condition persists, and no other unit LED on the CEX-Bus is lit: • Check that a valid HW configuration including the CI865 is downloaded to the controller. • Check the CEX-Bus fuse inside the PM8xx processor unit • Initiate a reset signal (INIT) from the PM8xx processor unit • Replace the CI865 unit