Petroleum Products Kinematic Viscosity Tester

Product Model: JF265 (Conventional Manual)

Product introduction

This instrument is suitable for measuring the viscosity of petroleum products. The mechanism of the instrument is: at a certain constant temperature, to measure the time for a certain volume of liquid to flow through a calibrated glass capillary viscometer under gravity, the product of the capillary constant of the viscometer and the flow time is the temperature at this temperature. Determine the kinematic viscosity of liquids.

Technical Parameter

1. Applicable standards: ASTM D445, ISO3104, DIN51366

2. Temperature control method: imported PID digital temperature controller

3. Temperature control accuracy: ±0.1℃

4. Temperature control range: room temperature～100℃

4. Heating method: electric heating tube heating

5. Power of the whole machine: 2KW

6. Working unit: 4 pipes, equipped with sliding hammer

7. Working power supply: AC220V/50Hz

8. Instrument size: 360*360*520mm

9. Net weight: 20KG

Features

1. 360° transparent structure, easy to observe;

2. All-aluminum operating table, the surface is treated by oxidation drawing;

3. The sputtering turbine liquid circulator improves the temperature uniformity of the upper, middle and lower parts of the bathtub;

4. Four samples can be tested at the same time, which is convenient for parallel samples;

5. High-power solid-state relay control output, no voltage leakage;

6. There is a stirrer on the electronic heating bath;

7. Stainless steel heater;

8. The thermostat displays the heating state;

9. Safety protection device to prevent overheating and low water level;

10. Imported Omron PID thermostat, digital display temperature, degree 0.1℃