Floc Point of Refrigerator Oils Tester            DIN51351

Product model: JF12577

Product Introduction

The test principle of this instrument: mix a certain amount of sample and refrigerant in the test tube, put them in the cold bath of the Floc Point tester after mutual dissolution, and gradually cool down at a certain speed, observe under the care, when it starts When turbidity or Floc occurs, record the temperature at this time. This instrument is suitable for mineral oil type refrigerating machine oil, and also suitable for synthetic oil type refrigerating machine oil.

Technical Parameter

1. Applicable standard DIN51351

2. Refrigeration mode dual compressor refrigeration

3. Temperature range: normal temperature ~ -80℃

4. Digital display PID temperature controller for temperature control

5. The power of the whole machine is 1KW

6. Working unit 1 tube

7. Working power supply AC220V/50HZ

Performance Characteristics

1. Double compressor cascade refrigeration to ensure the supply of cold capacity;

2. Microcomputer temperature controller. Digital display, ±0.2℃ PT100 sensor;

3. The glass Dewar is used as a cold bath, and the heat preservation effect is good;

4. The split structure reduces the damage caused by the vibration of the instrument;

5. Stainless steel heater;

6. The evaporator adopts copper chrome-plated coil;

7. There is daylight behind the Dewar, which is convenient for observation;

8. The stainless steel clamping system can quickly clamp the test tube;

9. Special glass test tube, which meets the standard requirement