Thermal Oxygen Stability of Lubricating Oil Tester    

Product Model: JF0259

Instrument Introduction

This instrument is suitable for lubricating oil. Its basic operation method is: at a specified temperature, it is the time required for a thin layer of lubricating oil to oxidize on the metal surface to detect the working fraction and the oily residue composed of paint.

 Technical Parameter

1. Applicable standard: SH/T0259

2. Heating method: electric heating tube heating

3. Gas regulation: * dense flowmeter

4. Temperature control method: digital display PID temperature controller

5. Power of the whole machine: 2KW

6. Temperature control range: normal temperature～125℃±0.2℃

7. Timing method: digital display timer

8. Working unit: 4 tubes

9. Working power supply: AC220V/50HZ

Performance characteristics

1. The glass test tube meets the standard requirements;

2. One steel ball, one copper ball, 5mm±0.1mm;

3. Spiral coil: 15mm×65mm Copper sheet: 0.25mm×24mm×62mm;

4. The most dense flow meter controls oxygen 200ml/min;

5. Gas washing device: a sulfuric acid bottle, a sodium hydroxide bottle, and a safety bottle;

6. Microcomputer temperature controller, digital display, maximum ±0.2℃ PT100 sensor;

7. Digital display timer, record test time, with buzzer;

8. Four tests can be carried out at the same time;

9. Stainless steel electric heater, heating bath;