Corrosion of lubricating Oil Tester   

 Product Model: JF391

Product Introduction

This instrument is suitable for determining the degree of corrosion of engine lubricating oil. The principle is that only the test piece is in contact with the sample, and the corrosion degree of the sample is determined according to the weight change of the metal test piece after a test at a certain temperature for 50 hours.

Technical Parameter

1. Applicable standard: GB/T391

2. Heating method: electric heating tube heating

3. Temperature control: ±0.1℃

4. Stirring method: mechanical stirring

5. Temperature control method: digital display PID thermostat

6. Temperature control range: normal temperature～140℃

7. Timing method: digital display timing

8. Power supply: AC220V/50HZ

Main Feature

1. Two standard lead sheets 20×45×1.5mm;

2. Digital display of microcomputer temperature controller, 0.1℃, PT100 sensor;

3. Two standard glass test tubes 270×30mm;

4. Microcomputer timer, digital display, with wind chime to remind;

5. The oil bath is heated, and the liquid level is protected against over-temperature;

6. The mechanical stirring device reduces the error of manual intervention;

7. Stainless steel heater, stainless steel bath body;