Seal Adaptability of Petroleum Products Tester      IP278 

Product Model: JF0305

Introduction

This instrument is suitable for the determination of various petroleum products, but not suitable for the determination of water-containing petroleum products. Use a tapered gauge to measure the inner diameter of the rubber ring, then soak the rubber ring in a sample at a certain temperature for 24 hours, take it out and cool it, and measure the change in the inner diameter of the rubber with a tapered gauge.

Technical Parameter 

1. Applicable standard: SH/T0305 IP278

2. Electricity source: AC220±10% 50Hz±5%

3. Heating method: electric heating wire heating

4. Temperature control method: PID temperature controller

5. Temperature control range: normal temperature~100±1℃

6. Working voltage: 10KV±2%

Main feature 

1. The instrument includes a convection oven designed according to the standard, the high temperature can reach 100°C, glazed stainless steel surface, desktop;

2. Stainless steel lining, with fan, inner size 350 x 350 x 350 mm. Efficient thermal insulation;

3. Stainless steel heater;

4. A 300 x 200 mm glass window is installed on the double door for easy observation;

5. Two openings, one at the bottom and one at the top, for ventilation;

6. Standard alloy steel gauge;

7. Microcomputer and PID control temperature, digital display, 0.1°C, Pt100 RTD temperature probe;

8. Working range: room temperature ~ 100°C ± 1°C;

9. Over-temperature safety protection;