ASTM standard salt spray chamber
USD $7000 - $20000 /Set
Min.Order:1 Set
Hyde Science and Technology Limited
ASTM standard salt spray chamber
Salt spray test chamber is mainly used for corrosion testing in continuous or regularly sprayed salt spray
environments.The salt water spray test is used to test the corrosion resistance of various materials after anti-corrosion
treatments such as electroplating, anodizing, spraying and anti-rust oil. It mainly simulates the influence
of marine climate on product quality, and evaluates its anti-corrosion ability according to the standard.
Model | HD-60 | HD-90 | HD-120 | HD-160 | HD-200 | |
Internal dimensions (D*W*H) | 450*600*400 mm | 600*900*500 mm | 800*1200*500 mm | 1000*1600*500 mm | 1200*2000*600 mm | |
External dimensions (D*W*H) | 672*1150*1090 mm | 842*1450*1200 mm | 1240*2080*1285 mm | 1450*2480*1520 mm | 1650*2900*1550 mm | |
Lab Temperature | Saline testing method (NSS ACSS) 35℃±1℃/ Erosion-resistant testing method (CASS) 50℃±1℃ | |||||
Pressure pot temperature | Saline testing method (NSS ACSS) 47℃±1℃/ Erosion-resistant testing method(CASS )63℃±1℃ | |||||
Saline Temperature | 35℃±1℃ 50℃±1℃ | |||||
Lab capacity | 108 L | 270 L | 480 L | 800 L | 1440 L | |
Saline box capacity | 15 L | 25 L | 40 L | 40 L | 40 L | |
Saline concentration | Sodium chloride solution with 5% concentration or less than 0.26g copper chloride is added to each liter of sodium chloride solution with 5% concentration | |||||
Compressed air pressure | 1.00±0.01kgf/cm2 | |||||
Spray volume | 1.0~2.0ml/80cm2/h (at least collecting 16 hours and take the average value) | |||||
Relative humidity in the lab | Above 85% | |||||
Value PH | 6.5~7.2, 3.0~3.2 | |||||
Spray method | Programmable spray (including Continual spray and discontinuous spray) | |||||
Power | AC220V1Φ10A | AC220V1Φ15A | AC220V1Φ20A | AC220V1Φ20A | AC220V1Φ30A |