Product Details

high acceleration shock test system

KCT13 series high acceleration shock test system is specially developed to meet the requirements of military industry, home appliances and other industries. The system adopts the principle of air pressure storage expansion, by adjusting the air inflation pressure, it is convenient to implement various high energy acceleration tests in a short stroke.

For classical free drop shock tester, to achieve high acceleration, it is equipped with a shock amplifier which is for general free drop shock tester.

Functions and features:

◆Windows-based stable control system: fully automatic remote control interface, the operator only needs to input simple values, KCT90 series shock and bump measuring controller can accurately complete the shock test;

◆ Unique driving method: driven by air pressure energy storage, low cost, no pollution, clean and tidy;

◆ Automatic control of lifting height: After the height setting is completed, the computer automatically controls the lifting height of table, high accuracy and good repeatability;

◆Forged aluminum/ steel table with high performance: Forged aluminum -magnesium alloy and special composite table, provides a higher strength and hardness, and a much higher first-order resonance frequency, low noise, and no clutter;

◆Easy installation: the device is equipped with high-performance buffer vibration isolation device, no need for special foundation, easy and reliable to install;

◆ Perfect measurement system: there are various waveform tolerance zones in the system memory, which is convenient for users to adjust and apply, and automatically complete the test report generation after the test is over;

◆ System compatibility: compatible with a variety of shock measurement and analysis software systems, to provide users with more choices;

Technical parameter of shock amplifier:

Model	KCT13-1	KCT13-2	KCT13-3
Rated load (kg)	2	5	10
Useful table size (mm)	80*80	150*150	300*300
Shock waveform	Half sine wave
Max. peak acceleration (m/s²)	500000	100000	30000
Min. pulse duration (ms)	0.05	0.1	0.5
Amplifier weight (kg)	15	50	100

Note: This series of shock amplifiers can be applied to standard shock test system manufactured by any manufacturers.

Main technical parameter of KCT13 series high acceleration shock test system:

Model	KCT13-50		KCT13-100
Rated load (kg)	50		100
Table size (mm)	350*300 mm		500*500 mm
Shock waveform	Half sine	Post peak sawtooth	Half sine	Post peak sawtooth	Trapezoid
Shock peak acceleration (m/s²)	100~ 8500	100~2000	100~ 7000	100~2000	150~1000
Shock pulse duration (ms)	40~0.8	18~3	40~1	18~3	12~6
Bump waveform	Half sine wave
Bump peak acceleration (m/s²)	50~1500		50~1000
Bump pulse duration (ms)	30~3		30~3
Overall dimensions (mm)	9008002000		130010002100
Weight (kg)	1000		1800
Max. frequency times (times/min)	100		80
Power supply requirements for Table	AC 220V±10%, 50Hz, 2kVA
Power supply requirements for Air compressor	AC 220V±10%, 50Hz, 3kVA or AC 380V±10%, three-phase, 50Hz, 5kVA
Air source conditions	Air source output pressure is not more than 1.0Mpa. If there is no air source in the lab, air compressor needs to be configured; If there is air source in the lab, and there is a high requirement on the bump frequency times, it needs to configure a corresponding air storage tank.
Environment temperature	0~40℃
Humidity (%)	≤90% (25℃), non condense

Model	KCT13-200			KCT13-500
Rated load (kg)	200			500
Table size (mm)	800*600 mm			800*800 mm
Shock waveform	Half sine	Post peak sawtooth	Trapezoid	Half sine	Post peak sawtooth	Trapezoid
Shock peak acceleration (m/s²)	100~ 3000	100~ 1000	150~1000	100~2000	100~600	150~600
Shock pulse duration (ms)	40~1.5	18~3	12~6	40~2	18~6	12~6
Bump waveform	Half sine wave
Bump peak acceleration (m/s²)	50~1000			50~1000
Bump pulse duration (ms)	30~3			30~3
Overall dimensions (mm)	150013002350			155014402400
Weight (kg)	2500			2800
Max. frequency times (times/min)	80			60
Power supply requirements for Table	AC 220V±10%, 50Hz, 2kVA
Power supply requirements for Air compressor	AC 220V±10%, 50Hz, 3kVA or AC 380V±10%, three-phase, 50Hz, 5kVA
Air source conditions	Air source output pressure is not more than 1.0Mpa. If there is no air source in the lab, air compressor needs to be configured; If there is air source in the lab, and there is a high requirement on the bump frequency times, it needs to configure a corresponding air storage tank.
Environment temperature	0~40℃
Humidity (%)	≤90% (25℃), non condense

Model	KCT13-800			KCT13-1000
Rated load (kg)	800			1000
Table size (mm)	1000*800 mm			1000*1000 mm
Shock waveform	Half sine	Post peak sawtooth	Trapezoid	Half sine	Post peak sawtooth	Trapezoid
Shock peak acceleration (m/s²)	100~ 2000	100~600	150~600	100~2000	100~600	150~600
Shock pulse duration (ms)	40~3	18~6	12~6	40~3	18~6	12~6
Bump waveform	Half sine wave
Bump peak acceleration (m/s²)	50~1000			50~1000
Bump pulse duration (ms)	30~3			30~3
Overall dimensions (mm)	160014502450			175016002500
Weight (kg)	3800			4000
Max. frequency times (times/min)	50			40
Power supply requirements for Table	AC 220V±10%, 50Hz, 2kVA
Power supply requirements for Air compressor	AC 220V±10%, 50Hz, 3kVA or AC 380V±10%, three-phase, 50Hz, 5kVA
Air source conditions	Air source output pressure is not more than 1.0Mpa. If there is no air source in the lab, air compressor needs to be configured; If there is air source in the lab, and there is a high requirement on the bump frequency times, it needs to configure a corresponding air storage tank.
Environment temperature	0~40℃
Humidity (%)	≤90% (25℃), non condense