Product Details

AC system horizontal chilled water ceiling concealed fan coil unit

Product Description

Fan coil units are referred to as fan coils. It is one of the end devices of an air conditioning system consisting of a small fan, a motor and a coil (air heat exchanger). When the chilled water or hot water flows through the coil pipe, heat is exchanged with the air outside the pipe, the air is cooled, and the indoor air parameters are adjusted by dehumidifying or heating. It is a commonly used cooling and heating terminal device.

Fan Coil Units Features

1. Fine structure, beautiful appearance

2. Design features

3. High efficiency

4. Less water loss

5. Power saving, low noise, long life

FP-51 FAN COIL UNIT PARAMETERS

performance model				FP-51MA
rated air flow (m3/h)			high speed	510
			Medium speed	445
			low speed	339
cooling capacity		high speed	W	3160
		medium speed	W	2863
		low speed	W	2180
Heating capacity		high speed	W	5335
		medium speed	W	4667
		low speed	W	3554
input power(W)		12pa		42
		30pa		60
		50pa		75
noise dB (A)		12pa		37
		30pa		41
		50pa		43
fan		type		Multi-wing centrifugal or double suction fan
		quantity		2
motor		type		permanent capacitance motor 220V/50HZ
		quantity		1
cooler		structure type		copper tube double flanged aluminum fin mechanical expansion tube
		inlet & outlet diameter		Rc3/4 (intra-spinal thread)
		other		Normal working pressure 1.0MPa, Max. Not less than 1.6MPa
Unit weight		no return bellows		15
	with return bellows			19
water capacity(kg/min)				9.3
water buck(kpa)				18
condensate pipe				Rc3/4 outside the spinal canal

Remarks:

1) Cooling: Supply water temperature 7°C/12°C; Return air condition: dry bulb temperature 27°C, wet bulb temperature 19.5°C.
2) Heat supply: return air condition: ball temperature 21°C,
3) The noise in the table is measured by the unit in the full-leakage room with background noise of 16.5dB(A).
4) When the static pressure is low, the static pressure value of the unit is 0 Pa, and the static pressure is 12 Pa.
5) Other static pressure units can be configured according to customer requirements (signed when signing the contract).

Component of Horizontal Fan Coils

Fan Coil Unit Type

According to the structure can be divided into: vertical, horizontal, wall-mounted, card and so on, according to the installation can be divided into wall-mounted and concealed; wall-mounted fan coil units are all mounted units, its compact structure, good appearance Hang directly above the wall. The card-type (ceiling embedded) unit, the more attractive entrance and exit, is exposed under the ceiling, and the fan, motor and coil are placed above the ceiling, belonging to the semi-solid installation unit. The surface mounted unit has a beautiful shell, with its own inlet and outlet, installed in the room. The casing of the concealed unit is generally made of galvanized steel.