TT-CRZ-I   Thermoplastic Road  Marking Machine

1.Engine: The 30HP water-cooled electric startup diesel engine with three cylinder in-line, low noise and environmental protection. The fuel tank’s cubage is 100L.
2.Heating: infrared propane heating, electronic ignition and conduction oil heating together save 30% fuel compared with traditional heating way, which make the heating evener, quicker, more secure and more environmental. 3.Marking way:Left(or right)side equip with single (or doulble) atomized air-auxiliary spray gun.The spray gun can move freely on the track, the hot oil cycle pump and heat exchanger improve the spray efficiency.
4.Glass beads spray system:Equipped with double 120L pressurized glass beads container with a window ,which realizes uninterrupted spray glass beads. Double or single glass beads gun at left or right side with adjustable pressure ,flow and spray width,makes the glass beads spraying more firm and evener .
5.Electronic control: Setting multi-function interface ,and when the machine out of factory, set marking standards according to the requirements of the users, and the line type and its length can be freely adjusted to meet the users’ needs during contruction. At the same time, the intellective control can be realized. Continuous line and broken line can be done together in the same programm.
6.Paint tank: Double tanks made of cold-rolling anti-oxidation steel heated by conduction oil, which can realize uninterruptable work during construction. The heating temperature can be freely adjustable according to the different types of paint chosen by users. Equipped inside with hydraulic vertical vane agitating device. Capacity of single tank:600kg (can be extended).
7.Air compressor: 2.5m2/min screwing air compressor with low noise and low energy consumption., enough air and stable pressure.
8.Warning system: Equipped with double frequency adjustable warning lights.The electric warning arrow at the back (the flash direction is adjustable)improves the safety of road marking work.
9.Guide rod:Adjustable guide rod ,whicn makes up,down ,left and right easy.
10. Pre-marking system:Option for pre-marking system.Finish the pre-marking work for other line during srpaying work,which greatly improves the efficiency of road marking construction.
11.Size Weight: 9985mm(length) ×2470mm(width)×3625mm(height).  2700kg.

Remarks:
1.We can produce the thermoplastic machine for types of multi-dot, extrusion, screeding, etc according to different countries, climate and technical data, which also has the marking functions of high-pressure airless spraying or low-pressure air-auxiliary spraying.
2.Option for vehicles of different brand, model and carrying capacities according to the customers’ requirements.