Cold Plastic, buy road surface marking/Self-Propelled Hand-hold Road-marking Machine) on China Suppliers Mobile

Product Details

Product Name: TT-ST100-II Self-Propelled Hand-hold Road-marking Machine

Detailed Description of TT-ST100-II Self-Propelled Hand-hold Road-marking Machine:

1. Engine of TT-ST100-II Self-Propelled Hand-hold Road-marking Machine: Japanese Robin6.0HP or Honda 6.5HP four-stroke air-cooled OHV gasoline engine.
2. Drive system of TT-ST100-II Self-Propelled Hand-hold Road-marking Machine: The original imported variable speed transmission system with automatical brake device and flexible operated in forward, back off or stop(HTS). The left and the right front wheels are differential transmission devices which make curve running and turning more convenient. The manual brake device makes the running more safety.
3. Drive speed of TT-ST100-II Self-Propelled Hand-hold Road-marking Machine: Forward0-4km/h, back off 0-4km/h.
4.Max climbing capability: 15°
5. Micro-control system(optional): It is consisted of micro-electronic controller, on-off coder, electro-magnet, special gun bucket.etc,which sets four different marking methods according to the national marking standards and carries out fully automatic control. If not choose this system, equip with the brake-controlled spray gun controller which can freely change the single or double gun.
6. Chassis: Firm welding frame, whose surface has been chrome-plated or sprayed anti-corrosion coating, equip with imported bearing which ensures the whole machine more lightsome and more convenient.
7.Rubber wheel : The left and right back wheels are gas-filled pressure resistant vacuum wheels, whose diameters are ?440mm; the back stern wheels are the special naturally modified rubber wheels with abrasion resistance, whose diameter is ?190mm.
8.Back stern wheel guide arm: Lock the direction device on back stern wheel which can ensure road-marking machine freely operation in straight or twist
9. Guide rod: Freely adjust up, down, left, right.
10. Light and alarm function(optional): The prepared high intensity illuminating lamps provide convenience for the construction at night. The flash lights which can freely adjust the flicker frequency largely improve the safety in construction .
11. Paint pump: The new type diaphragm high pressure air-free pump has big flow and stable pressure, whose max pressure is 25mpa (working pressure is 10-15 Mpa ) max flow: 8.5 L/min.
12. Paint tank: Cubage: 65L. There is sieve in the tank ,and air in-take sieve in the feed port.
13.Spray gun: The double new type hand spray guns own hard side columnar reverse wastewater nozzle (17/25), which makes the site discharge very convenient and fast; the non-arc nozzle ensures the base line collimated. The 10m lengthening pipe which is installed with the machine can be used for normal spray, such as spray arrow-head, character and so on.
14.Spray width: 100-450mm.
15. Glass beads dispenser: The automatical flowing dispenser with 400 width can realize the refflecting effects of marking at the same time of spraying common line, whose dispense width can freely be set 100mm, 200m, 400mm three kinds according to the needs of construction.
16. Glass micro-beads storage bin: The bin has a window can check the quatity of glass beads in time.
17. Size(not include of chair behind). The whole machine weight: 1480mm (length ) *1180mm (width ) *1050mm (height ). 264kg.

18.Optional for air-compressor, glass beads pressurized storage, glass beads spray gun, glass beads spray control system and stainless spray system to meet the needs of water paint construction.