Product Name: TT-QC-I Alloy Knife Type Waste Line Remover:

Detailed Description of TT-QC-I Alloy Knife Type Waste Line Remover:

1.Engine of TT-QC-I Alloy Knife Type Waste Line Remover: America Briggs&stratton 10.5HP air-cooled gasoline engine, and the 
throttle is controlled by handle brake.
2.Removal cutter of TT-QC-I Alloy Knife Type Waste Line Remover: Imported tungalloy cutter is hard and fast. And the cutter 
has two kinds 24teeth and 48teeth. The 24teeth cutter is also called 
thermoplastic cutter which is used for removing themolplasticmarking, and the 
48 teeth is mainly used for removing cold plastic marking. Commonly, no matter 
themolplastic or cold plastic marking, the two kind cutters can be used. And 
both have long service life, and are easy to assemble.
3.Depth adjuster: Fix with depth adjuster, adjust and fix it according to the 
needs. Adopt accurate pitch, which can accurately control the depth according 
to needs.
4.Pressure adjuster: Fix with depth dial, adjust the pressure of removal 
cutter to road surface. According to the conditions of road surface and 
different kinds of paint ,adjust the removal pressure ,whose max pressure can 
insert into road surface .
5.Protective device :Automatic clutch makes the cutter automatic clutch with 
removal shaft according to the engine speed and the conditions of road 
surface, which makes sure the high quality removal, less damages and extends 
service life. Dust collector interface 76mm (optional dust colletor device). 
Option for watering device ,which greatly reduces the dust produced on job 
site. Rubber bush fixed arround the cutter can prevent dust and fragment 
during construction, which makes sure the safety of operator.
6.Emergency stop device: Equip with emergency stop switch, which can stop the 
machine in short time.
7.Parking device :Convenient foot control parking system makes the machine in 
safety condition in any time .
8.Operation :Forward ,back off ,left or right freely. Removal width can up to 
620mm when left-right operation, removal width can up to 180mm when forward or 
back off.
9.Chassis :Firm welding frame ,whose surface has been chrome-plated or high 
temperature treatment ,The four-wheel structure makes the whole machine work 
more stable ,and operation more convenient.
10.Wheel:Front wheels are special abrasion resistance improved rubber wheel, 
the diameter is 250mm, back wheels are abrasion resistance improved rubber 
wheel, the diameter is 150mm, which can effectively prevent tackless or 
deformation after the shaking for a long time front and back wheels are 
special steel wheels. Equip with high speed imported bearing ,which makes the 
whole machine more lightness.
11.Size . Weight :1382 mm(lenght)*705 mm(width)*960 mm(height).206kg.