Specifications

100W 12V dc switching power supply
High Efficiency & Low Operation Temperature, better heat sink effect by black cover

100W 12V dc switching power supply  (S-100-12)

Model Specification	S-100-3	S-100-5	S-100-7-5	S-100-12	S-100-15	S-100-24	S-100-27	S-100-48
DC output voltage	3V	5V	7.5V	12V	15V	24V	27V	48V
Output voltage error (Note2)	±2%	±2%	±1%	±1%	±1%	±1%	±1%	±1%
Rated output current	20A	20A	13.6A	8.5A	6.7A	4.5A	3.7A	2A
Output current rage	0-20A	0-20A	0-13.6A	0-8.5A	0-6.7A	0-4.5A	0-3.7A	0-2A
Wave and noise(Note3)	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p
Inlet stability(Note4)	±0.5%	±0.5%	±0.5%	±0.3%	±0.3%	±0.2%	±0.2%	±0.2%
Load stability(Note5)	±0.5%	±0.5%	±0.5%	±0.3%	±0.3%	±0.2%	±0.2%	±0.2%
DC output power	60W	100W	102W	102W	100.5W	108W	99.9W	96W
Efficiency	70%	78%	80%	81%	81%	84%	84%	84%
Adjustable range for DC voltage	2.85-3.3V	4.75-5.5V	6.75-8.25V	10.8-13.2V	13.5-16.5V	21.6-26.4V	26-32V	43.2-52.8V
AC input voltage range	85~132VAC/180~264VACselected by switch47~63Hz;255-370VDC
Input current	2.4A/115V 1.2A/230V
AC impulse current	Cold-start current 30A/115V 60A/230V
Leakage current	<1mA/240VAC
Overload protection
Over-voltage protection	……
High-temperature protection	……
Temperature coefficient	±0.03%°C(0~50°C)
Setup rise hold up time	200ms,100ms,30ms
Vibration	10~500Hz,2G 10min./1cycle,Period for 60min,Each axes
Withstand voltage	Input and output interval  1.5KVAC,Input and enclosur  1.5KVAC,Output and enclosure  0.5KVAC
Isolation resistance	Input and output interval,Input and enclosure,Output and enclosure 0500VAC/100M Ohms
Working temperature and humidity	-10°C~+60°C,20%~90%RH
Store temperature and humidity	-20°C~+85°C,10%~95RH
Overall dimension	199*98*38mm
Weight	0.5Kgs
Safety standards	Meet UL1012
EMC standards	……
Note:1.The testing condition for the parameter above is:230VAC input, rated load,25°C 70%Rh,Humidity 2.Error,include the setting error, line stability and load stability.(Note:5) 3.Wave test:adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage. 5.Load stability test: The load is from 0% to 100%,others 60%. 6.C2,3,11must be knocked down.

 For more other models, please kindly check following:

Anything you concern, please be free to contact us. We will be more than happy to offer any help we can.