Product Details

Specifications

50W 5V 10A LED switching power supply S-50-5
1.High reliability, a wide input range
2.Low price; high quality
3.CE ISO9001

50W 5V 10A LED switching power supply S-50-5

50W switching power supply

1. Competitived price and high reliability

2. 105^oC Output capacitor

3. AC input power suitable for the world

4. High efficiency and low operation temperature

5. Soft-start current can reduce the AC input impact effeciticly

6. With short-circuit and overload protection

7. Compact size, light weight

8. 100% full-load burn-in test

9. Installed with EMI filter, minimum wave

Model	S-50-5	S-50-12	S-50-15	S-50-24
DC output voltage	5V	12V	15V	24V
Output voltage rang(Note:2)	±2%	±1%	±1%	±1%
Rated output current	10A	4.2A	3.4A	2.1A
Output current range	0-10A	0-4.2A	0-3.4A	0-2.1A
Wave and noise(Note:3)	75mVp-p	100mVp-p	100mVp-p	100mVp-p
Inlet stability(Note:4)	±0.5%	±0.5%	±0.5%	±0.5%
Load stability(Note:5)	±1%	±0.5%	±0.5%	±0.5%
DC output power	50W	50.4W	51W	50.4W
Efficiency	71%	78%	78%	78%
Adjustale range for DC voltage	+10,-5%	+10%	+10%	+10%
Input current	1.3A/115V 0.65A/230V
AC Inrush current	Cold-start current 18A/115V 36A/230V
Leakage current	<0.5mA/240VAC
Overload protection	105%~150% Type: pulsing hiccup shutdown Reset: auto recovery
Temperature coefficient	±0.03%/°c(0~50°c)
Setup, rise, hold up time	200ms, 100ms, 30ms
Vibration	10-500Hz, 2G 10min,/1cycle, Period for 60min, Each axes
Withstand voltage	Input and output internal 1.5KVAC, Input and enclosuer 1.5 KVAC, Output and enclosuer 0.5 KVAC
Working temperature and humidity	-10°c~+60°c Refer to output derating curve, 20%~90% RH
Store temperature and humidity	-20°c~+85°c, 10%~95%RH
Weight	0.5Kgs
Satety standards	Meet UL 1012 requirement (Not apply for the mark)
Note: 1. The testing condition for the parameter above is: 230VAC input, rated load, 25°c 70% RH.Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3.Wave test: adopting "A12" double wire for 20 MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: wht is overload, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%