industrial temperature and humidity sensor
Negotiable /Unit
Min.Order:1 Unit
AMBETRONICS ENGINEERS PRIVATE LIMITED
humidity sensor
FEATURES:
APPLICATIONS:
TECHNICAL SPECIFICATIONS: | ||
Measuring Parameter | Humidity (% RH) | |
Range | 0 To 100 % RH | |
Resolution | 0.1 % RH | |
Accuracy | ± 1.8 % of full scale value | |
Sensor type | Capacitive polymer sensing for high Accuracy | |
Sensor Probe Details | Please specify while inquiring | |
Loop Output | Industrial Standard, 4 - 20 mA with permissible load 750 ohms at 24 VDC, 25 mA | |
Display | 0.5,3 ½ digit L.C.D Display / 0.4, 4 Digit L.E.D Display | |
Set Point | Two independent set points, AL1 & AL2 with blinking indication & Programmable Latch / Non-Latch facility; only for indication purpose (There is no relay output) | |
Setting | Setting by 4 keys on front panel i.e. 'SET / NEXT', 'UP', 'DOWN' & 'TEST / BACK' | |
Monitoring Sensor Open Indication | i) By Display : Shows 'oPn' ii) By Loop current :Up scale current : 22 mA, Down scale current :3.6 mA To 3.8 mA; programmable by user | |
Supply Voltage | 14 To 36 VDC, normally 24 VDC, 25 mA | |
Operating Temperature | - 40 To 85° C | |
Relative Humidity | Below 95% non condensing | |
Enclosure Details | Weatherproof (WP) | Flameproof (FLP)
|
Protection Class | IP-65 | IP-65,CMRI Approved for IIA & IIB Gas Group |
Cabinet Material | Polycarbonate, gray colour | Cast Aluminium alloy, LM-6 / C.I. Enclosure |
Cable Entry | 1 No, Thermoplastic cable gland (IP 68) | 1 No, Double compression cable gland (Ex-Proof), ¾ ET-type |
Dimension | 120 mm (H) X 80 mm (W) X 55 mm (D) in mm | 145 mm (H) X 185 mm (W) X 100 mm (D) in mm |
Mounting | Wall Mounting / Stand Mounting | Wall Mounting / Stand Mounting |
Weight | 250 Grams | 1Kg |
Sensor Housing | P.V.C. / SS316, Please specify while ordering |