TECHNICAL SPECIFICATIONS:

Analog Input

0 - 75mvolt from DC Shunt.

Sensor Break

Under Range 'UndEr', Over range 'ouEr', 'oPEn' indication for 0-75mV

Range

0 to 20000 (5 digit) counts of Ampere rate configurable as per Second, Min, Hour.
0 to 999999 (6 digit) counts of Ampere Hour Totalizer.
0 to 999999 (6 digit) Batch counter to know total no. of Batch completed.

Resolution

Field programmable decimal point selection for Ampere Indication by users.

Setting

By 6 keys on front panel.

Alarm Output

1 independent set point for Ampere rate setting.

2 Independent set points for Ampere Hour Totalizer setting

1 independent NO/C/NC contact for Ampere rate indication.

2 independent NO/C/NC contact for Ampere Hour total indication.

1 independent NO/C/NC contact for fail safe operation.

Relay Specification

5Amp. / 250VAC, 5Amp. / 30VDC at resistive load.

Control Action

L & H, H & VH, L & VL control action facility individual for each relay.
Auto reset pulse output for Batch application

Display

5 Digit for 20000 count for Ampere rate indication.
6 Digit for 999999 count for Ampere Hour Totalizer indication.

8 L.E.D.s for RL1, RL2, RL3, FAULT, PROG, SQR, TX, RX.

Memory

Non-Volatile memory to store the Totalizer value, Batch count, in case of power failure with 4 options of power up recovery i.e. No memory recovery, Batch memory recovery, Totalizer memory recovery & All memory recovery.

Reset

Provision for Total reset from the panel as well as remote reset from back terminal through potential free contacts input for Totalizer.

Supply

230VAC ±10% OR 110VAC‚±10% OR 24VDC.

Mounting

Panel mounting / Wall mounting for flameproof model.

Dimension

96(W) X 96(H) X 175(D) in mm. including backside connector.

Cutout

92(W) X 92(H) in mm.

Cabinet

ABS Plastic, White Color

Optional

a) Isolated RS485 Serial port with MODBUS RTU Protocol output for PC interface.
b) Isolated 4 to 20mA retransmission programmable output for recorder or PLC proportional to selective range.
c) Flameproof version is available on request for hazardous application.

Important

MODBUS RTU Protocol support to update instrument setting through PC. Powerful SCADA software is available.

Weight

Weight : 1.5 Kg.