industrial temperature humidity transmitter
USD $150 - $250 /Unit
Min.Order:1 Unit
AMBETRONICS ENGINEERS PRIVATE LIMITED
industrial temperature humidity transmitter
Features:
Applications :
TECHNICAL SPECIFICATIONS | |||||
General | Output Signal | ||||
Detection Method | Advanced CMOS ens Technology. | Standard | Two 4-20mA Current Outputs with configurable range selection. | ||
Display | 8 x 2 Alphanumeric LCD with Auto Backlit. 8 LEDs to indicate status of instrument. | Optional | Two SPDT Relays of rating “120VAC/2A, 240VDC/2A”. | ||
Control Action | i) Two independent Alarm set points with Latch & Non-latch facility. | Optional | RS-485 Communication port with MODBUS RTU protocol. | ||
Setting | By 3 Keys on front panel | Error Monitoring
| |||
| i) During Sensor break / open, the Display shows ‘SENSOR OPEN’ & 4-20mA output goes down to 3.7mA.
| ||||
Performance | Environmental | ||||
Measurement Accuracy | ±0.3°C for Temperature, ±1.8% for Relative Humidity | Storage Temperature | 10 to +50°C | ||
Response Time | Less than 30 Seconds. | Operating Temperature | -40 to +120°C | ||
Start-up Time | Less than 30 Seconds. | Humidity | 100% Non-Condensing. | ||
Electrical | Accessories | ||||
Power Supply | 24 VDC (18 to 36 VDC) | certified 24 VDC Power supply. | RS-232 to RS-485 convertor | ||
Power Consumption |
| Canopy Mounting stand. | Hooter Cum Flasher. | ||
Connection | 3 Wires (1.5 mm2) Flexible or Armored Shielded Cable. | SCADA Software. | Remote Control. | ||
|
| RS-485 to USB convertor |
| ||
Weatherproof Housing | Flameproof Housing | ||||
Protection Class | IP-65 | Protection Class | IP-65 for Gas Gr. IIA, IIB & IIC CMRI approved enclosure, CCOE(Optional). | ||
Cabinet Material | Polycarbonate, grey colour | Cabinet Material | Cast Aluminium alloy, LM-6 | ||
Cable Entry | Thermoplastic cable gland (IP 68) | Cable Entry | Double compression cable gland (Ex-Proof), ¾” ET-type | ||
Dimension | 171 mm (H) x 83 mm (W) x 57mm (D) | Dimension | 180 mm (H) x 242 mm (W) x 128mm (D) | ||
Mounting | Wall Mounting / Stand Mounting | Mounting | Wall Mounting / Stand Mounting | ||
Weight | Approx 500 Grams. | Weight | Approx 2.0 Kg. |