TECHNICAL SPECIFICATIONS:

Inputs

Range

Resolution

Accuracy

Minimum

Maximum

Normal

Full Scale

RTD PT 100 (3 WIRE)

-200°C

400.0°C

0.1

±0.25%

J Type (Fe - CON)

-50.0°C

600.0°C

0.1

±0.25%

K Type (Cr- AL)

-50.0°C

500.0°C

0.1

±0.25%

K Type (Cr- AL)

-50°C

1200°C

1

±0.25%

R Type (PT 13 % RH / PT), S TYPE (PT 13 % RH / PT)

0°C

1750°C

1

±0.25%

T Type (Cu / CON)

-50°C

400.°C

0.1

±0.25%

N Type, E Type (Cr / CON)

0°C

1300°C

1

±0.25%

B Type (PT 6 % RH / PT 30 %RH)

400°C

1820°C

1

±0.25%

4~20 Ma / 0 ~20 mA

-999

9999

Programmable by User

±0.25%

Voltage (0 ~1 VDC / 0~ 10 mVDC)

-999

9999

±0.25%

Compensation

Automatic Cold Junction Compensation for all Thermocouples. Automatic Wire length for long wire RTD Inputs

Sensor Break

Temperature Sensor Break OR Sensor Open, Display Shows 'oPEn' indication. Under Range 'Undr' Over Range 'ouEr' indication for 4~20mA & 0~10 VDC.

Display

4 Digits of 13 mm Height L.E.D. for process value display.

4 L.E.D.s for RL1, RL2,TX, RX

Setting

By 3 Keys on front Panel

Set Point

Two Independents set point with individual relay output with hysteresis settable. Programmable latch OR non Latch facility for both relay output.

Control Action

High & Very High. High & Low. Low & very Low Programmable by User.

Relay Output

1 NO/C/NC Relay Contact rated 230 V/5A for Relay 1 (RL1) & Relay 2 (RL2)

Supply

230 VAC +/-10%, 110VAC +/-10%, 24 VDC

Mounting

Panel Mounting / Wall Mounting type for Flameproof Model

Dimension

96 (W) x 48 (H) x 120 (D) in mm OR 72 (W )x 72 (H) x 120 (D) in mm

Cutout

92 (W) x 44 (H) in mm OR 68 (W) x 68 (H) in mm

Cabinet

ABS Plastic

Optional

a)Isolated RS485 serial port with MODBUS RTU Protocol output for PC interface. Powerful SCADA software is available.

b)Isolated 4 ~20mA / 0~1 VDC retransmission programmable output for recorder or PLC proportional to Selective range.

c)Flameproof Version is available on request for hazardous application.

Weight

1 Kg.