MODEL

PS-35-13.5

OUTPUT

DC VOLTAGE

13.5V

RATED CURRENT

2.6A

CURRENT RANGE

0 ~ 2.6A

RATED POWER

35.1W

RIPPLE & NOISE (max.)   Note.2

120mVp-p

VOLTAGE ADJ. RANGE

12.15 ~ 14.85V

VOLTAGE TOLERANCE Note.3

±1.0%

LINE REGULATION    

±0.5%

LOAD REGULATION    

±0.5%

SETUP, RISE TIME

1200ms, 30ms/230VAC,1200ms,30ms/115VAC at full load

HOLD UP TIME (Typ.)

50ms/230VAC,10ms/115VAC at full load

INPUT

VOLTAGE RANGE

90 ~ 264VAC         127 ~370VDC

FREQUENCY RANGE

47 ~ 440Hz

EFFICIENCY (Typ.)

81%

AC CURRENT (Typ.)

0.75A/115VAC         0.5A/230VAC

INRUSH CURRENT (Typ.)

COLD START 23A/115VAC         45A/230VAC

LEAKAGE CURRENT

<2mA / 240VAC

PROTECTION

OVER LOAD

105 ~ 150% rated output power (3.3V: 105~160°C rated output power))

Protection type : Hiccup mode, recovers automatically after fault condition is removed.

OVER VOLTAGE

15.5 ~ 18.2V

Protection type : shut down O/P voltage,re-power on to recover

ENVIRONMENT

WORKING TEMP.

-20~+65°C (Refer to output load derating curve)

WORKING HUMIDITY

20~90% RH non-condensing

STORAGE TEMP., HUMIDITY

-20~+85°C, 10~95%RH

TEMP. COEFFICIENT

±0.05%/°C(0~50°C)

VIBRATION

10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes

SAFETY&EMC

(Note 4)

SAFETY STANDARDS

UL60950-1, TUV EN60950-1 approved

WITHSTAND VOLTAGE

I/P-O/P:3KVAC   I/P-FG:1.5KVAC    O/P-FG:0.5KVAC

ISOLATION RESISTANCE

I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

EMI CONDUCTION & RADIATION

Compliance to EN55022 (CISPR22) Class B

HARMONIC CURRENT

Compliance to EN61000-3-2,-3

EMS IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A

OTHERS

MTBF

588.8Khrs

DIMENSION

101.6*50.8*24mm (L*W*H)

PACKING

0.124Kg;96PCS/12.9Kg/0.8CUFT

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.