Features

Part-A

Part-B

Ingredients

Polyether polyols

MDI

Color

As your request

Brown-yellow

Viscosity (25°C)

800-1000MPa.s

25-50MPa.s

Density

1.02g/ml

1.27g/ml

Physical form

Viscous liquid (sticky liquid)

EXP

6 months

Application

Injection automobile air filter end cover

Package

Export standard seaworthy packing

Hardness

Shore A

notes

1.  Keep in airproof, cool and dry place. Inner plunger and outer cover should be tightly covered. Or glue stock will absorb water in air and affect using effects.

2. Material-A or material-B could be used normally in the temperature of 25°C, if the temperature is too high or too low will affect the results. Must use artificial means to cool down or heat up the temperature.

3. Brushing the mould with release agent before pouring the adhesive into the mould, after the release agent dry then pour the adhesive.