Specifications

1.two component chemical PU adhesive
2.injection air filter cover
lor as your request
4.Shore A hardness as your request

Features:

1. Have a good sealing

2. used for injection air filter end cover,easy operation.

3. Cost saving

4. Environmentally friendly products

5. color as your request

6. Shore A Hardness as your request

Physical nature:

Two-component polyurethane adhesive for machine, component proportion ratio is 100:25
Features	Material-A	Material-B
Physical nature	orange-red viscous liquid	brown-yellow liquid
Color	color based on your request to configure
Viscosity	800-1000MPa.S(25°C)	25-50MPa.S(25°C)
Density	1.02g/ml	1.27g/ml
Package(as your request)	Plastic bucket or Tin bucket	Plastic bucket ,Tin bucket, Plastic pots
Weight(as your request)	25/50kg	6.25/12.5kg
Purpose	For air filter
Storage	1. Material-A and material-B can store up 3-6 months.
	2. To appropriate indoor storage above 15°C

Usage:

1. Material-A should be stirred or shaked when you injected it into the machine.

2. Material-A and material-B are mixed at the mixture ratio of 100:25 and the best work temperature is 28°C

3. The material’s temperature should be controlled 24°C-28°C then you can start operation

4. Brushing the Mold with release agent before using the mould (notice: the new plastic mould can be wiped free)

5. If the response is inadequate, please measure the ratio material-A and material-B.

6. Material-A and material-B must be sealed to store. Otherwise they can react with air or water, affect using effects.

 

 

 

If you like this adhesive, please don't hesitate, contact me!

You may rest assured that we are a profession manufature for all kinds of auto filter adhesive and we can supply high quality products with competitive price.