Specifications

1.two component PU glue
2.the ratio 100:25
lor or shore A hardness as your request
4.attend the auto show
5.ISO 9001

 

 

Machine adhesive  (100:25)

Physical nature:

Color:  part-A: orange-red (color as your request)

       Part-B: brown-yellow

Instructions:

1. Material-A should be stirred or shaked well when you injected it into the machine.

2. Material-A and material-B are mixed at the mixture ratio 100:25

3. The material’s work temperature should be controlled 24°C-28°C then you can start operation

4. Brushing the mould with release agent before using the mould (notice: the new plastic mould can be wiped free)

5. If the response is inadequate, please measure the ratio

6. Material-A and material-B must be sealed to store. Or they can react with air or water, affect using effects.

Notes:

1.  Keep in airproof, cool and dry place. Inner plunger and outer cover should be tightly covered. Or glue stock will absorb water in air and affect using effects.

2. Material-A or material-B could be used normally in the temperature of 25°C, if the temperature is too high or too low will affect the results. Must use artificial means to cool down or heat up the temperature.

3. EXP: 6 months 

4. Brushing the mould with release agent before pouring the adhesive into the mould, after the release agent dry then pour the adhesive.

Features	Part-A	Part-B
Ingredients	Polyether polyols	MDI
Color	As your request	Brown-yellow
Viscosity (25°C)	800-1000MPa.s	25-50MPa.s
Density	1.02g/ml	1.27g/ml
Physical form	Viscous liquid (sticky liquid)
EXP	6 months
Application	Injection automobile air filter end cover
Package	Export standard seaworthy packing
Hardness	Shore A
notes	1.  Keep in airproof, cool and dry place. Inner plunger and outer cover should be tightly covered. Or glue stock will absorb water in air and affect using effects.
	2. Material-A or material-B could be used normally in the temperature of 25°C, if the temperature is too high or too low will affect the results. Must use artificial means to cool down or heat up the temperature.
	3. Brushing the mould with release agent before pouring the adhesive into the mould, after the release agent dry then pour the adhesive.

  

  

Mobile phone:86-15175883233

Phone:86-0318-7850507

Fax:86-0318-7524169

Web:

  

If you are interested in this products,pls contact me at any time!