Name: PU+MDI mixed product adhesive (manufacturer)
Brand: JASL
Availability: InStock

Product Details

Specifications

1.Two component super glue
2.Best for air filter
3.PU+MDI mixed super glue
4.Attend auto exhibition
5.ISO9001

Features:

Instructions:

Part A must stir to mix well with electric hand/portable drill, part-B shake well, before using.
Wipe the mould with release agent.
According to the local environmental, add right amount of water. Each kilogram A add 3-6 grams of water.
Part-A and Part-B are mixed at the mixture ratio of 100:40, then add 40% talcum powder.
Stir the mixture to mix well, then pour it to the mould
Insert paper core and give a little pressure on it
7-10 minutes can demould.

The color and Shore A hardness as your request

Features	Part-A	Part-B
Ingredients	Polyether polyols	MDI
Color	As your request	Brown-yellow
Viscosity (25°C)	800-1000MPa.s	25-50MPa.s
Density	1.02g/ml	1.27g/ml
Physical form	Viscous liquid (sticky liquid)
EXP	6 months
Application	Injection automobile air filter end cover
Package	Export standard seaworthy packing
Hardness	Shore A
notes	1. Keep in airproof, cool and dry place. Inner plunger and outer cover should be tightly covered. Or glue stock will absorb water in air and affect using effects.
	2. Material-A or material-B could be used normally in the temperature of 25°C, if the temperature is too high or too low will affect the results. Must use artificial means to cool down or heat up the temperature.
	3. Brushing the mould with release agent before pouring the adhesive into the mould, after the release agent dry then pour the adhesive.