German technical background VOK®- AL R607 rheological additive is used in solvent-free and solvent based systems to improve the rheological properties with hydrophilic fumed silica and bentonite.

Product Information

chemical composition 

Oligoamide solution of amine functional group

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Density (20 ° C): 0.98 g/ml

Refractive index (20 ° C): 1.517

Viscosity: 20000mPa. s

application area 

Room temperature curing system

Product features and advantages

VOK®- AL R607 is a rheological additive used to improve the thixotropy of solid thixotropic agents, such as hydrophilic fumed silica or bentonite. The additive enhances the network formed by thixotropic agent to ensure that the network will not break as usual when amine curing agent is added. VOK®- AL R607 allows hydrophilic fumed silica or bentonite to be used solely in two-component epoxy systems. When using VOK®- For AL R607, it is unnecessary to use hydrophobic fumed silica in epoxy resin and hydrophilic fumed silica in curing agent to obtain very high coating thickness. The additive shall be added to the curing agent. Through thixotropic agent and The hydrogen bond formed between VOK®- AL R607 naturally increases the viscosity. Formula designers can now use cheap hydrophilic fumed silica or bentonite without loss of application performance. It can reduce the use cost of raw materials and improve the quality of products.

Recommended use

Epoxy resin system

Polyurethane system

Acrylate system

Recommended dosage

The amount of 20-80% additives (purchased form) is often based on the content of hydrophilic fumed silica and bentonite in the system.

The above recommended dosage is for reference, and good dosage shall be determined through a series of tests.

Adding method and processing guidance

It is recommended to add VOK®- AL R607 auxiliary agent into amine curing agent. If the amine curing agent already contains hydrophilic fumed silica or bentonite, please take it into account when calculating the dosage.

Special precautions

VOK®- AL R607 is only effective when it is shared with hydrophilic fumed silica and bentonite. The dosage depends on the amine curing agent used.

Coating industry

Product features and advantages

VOK®- AL R607 is a rheological additive used to improve the thixotropy of solid thixotropic agents, such as hydrophilic fumed silica or bentonite. The additive enhances the network formed by thixotropic agent to ensure that the network will not break as usual when amine curing agent is added. VOK®- AL R607 allows hydrophilic fumed silica or bentonite to be used solely in two-component epoxy systems. When using VOK®- For AL R607, it is unnecessary to use hydrophobic fumed silica in epoxy resin and hydrophilic fumed silica in curing agent to obtain very high coating thickness. The additive shall be added to the curing agent. Through thixotropic agent and The hydrogen bond formed between VOK®- AL R607 naturally increases the viscosity. Formula designers can now use cheap hydrophilic fumed silica or bentonite without loss of application performance. It can reduce the use cost of raw materials and improve the quality of products.

Recommended use

Protective coating

Architectural coatings

General industrial coatings

It is recommended to use the most

The amount of 20-80% additives (purchased form) is often based on the content of hydrophilic fumed silica and bentonite in the system.

The above recommended dosage is for reference, and good dosage shall be determined through a series of tests.

Adding method and processing guidance

It is recommended to add VOK®- AL R607 auxiliary agent into amine curing agent. If the amine curing agent already contains hydrophilic fumed silica or bentonite, please take it into account when calculating the dosage.

Special precautions

VOK®- AL R607 is only effective when it is shared with hydrophilic fumed silica and bentonite. The dosage depends on the amine curing agent used.

an adhesive

Product features and advantages

VOK®- AL R607 is a rheological additive used to improve the thixotropy of solid thixotropic agents, such as hydrophilic fumed silica or bentonite. The additive enhances the network formed by thixotropic agent to ensure that the network will not break as usual when amine curing agent is added. VOK®- AL R607 allows hydrophilic fumed silica or bentonite to be used solely in two-component epoxy systems. When using VOK®- For AL R607, it is unnecessary to use hydrophobic fumed silica in epoxy resin and hydrophilic fumed silica in curing agent to obtain very high coating thickness. The additive shall be added to the curing agent. Through thixotropic agent and The hydrogen bond formed between VOK®- AL R607 naturally increases the viscosity. Formula designers can now use cheap hydrophilic fumed silica or bentonite without loss of application performance. It can reduce the use cost of raw materials and improve the quality of products.

Recommended use

Reactive adhesive based on epoxy resin.

Recommended dosage

The amount of 20-80% additives (purchased form) is often based on the content of hydrophilic fumed silica and bentonite in the system.

The above recommended dosage is for reference, and good dosage shall be determined through a series of tests.

Adding method and processing guidance

It is recommended to add VOK®- AL R607 auxiliary agent into amine curing agent. If the amine curing agent already contains hydrophilic fumed silica or bentonite, please take it into account when calculating the dosage.

Special precautions

VOK®- AL R607 is only effective when it is shared with hydrophilic fumed silica and bentonite. The dosage depends on the amine curing agent used.