German technical background VOK®- AL 7610 water-based associative thickener, free of VOC, APEO and tin, highly pseudoplastic associative thickener, free of VOC, APEO and tin, is used to produce highly pseudoplastic flow behavior in water-based systems.

Product Information

Chemical composition: polyurethane solution

Typical Physicochemical Data

The data given in this data are only typical values, not technical indicators of the product.

Active substance: 20%

Density (20 ° C): 1.05 g/ml

Solvent: water

Application field

Coating industry

Product features and advantages

The VOK®- AL 7610 is well increased. The viscosity is well increased in the low shear range, while maintaining a good flow level. Liquid auxiliary, easy to handle and operate. Improve storage stability. There is no need to adjust the pH value or control the temperature when adding. Due to self leveling and high resistance to sagging, VOK®- AL 7610

Particularly recommended for airless/mixed/HVLP applications. When combined with rheological aids in the high shear range, good processability can be achieved.

Recommended use

Architectural coatings

Wood and furniture coatings

Protective coating

Industrial coatings

Recommended dosage

The dosage of 0.2-2% additives (purchased form) in the general formula is based on the general formula and depends on the required performance of the formula.

The above recommended dosage is for reference, and good dosage shall be determined through a series of tests.

Adding method and processing guidance

It is added under stirring conditions to ensure good distribution, dispersion, efficiency and repeatability in application. VOK®- AL 7610 is applicable to the steps of adding to abrasives and paint mixes, or as a post additive to trace and adjust the rheological properties of finished products.

Adhesives and Sealants

Product features and advantages

The VOK®- AL 7610 increases viscosity well within the range of good increase and low shear, while maintaining good flow level. Liquid auxiliary, easy to handle and operate. Due to its self leveling property, VOK®- AL 7610 is recommended for waterborne adhesive systems for spray, nozzle, and roller applications. The low foam stability trend in the application process is also an obvious advantage of this product. When used in combination with rheological additives in the high shear range, the processability can reach good workability.

Recommended dosage

The dosage of 0.2-3% additives (purchased form) in the general formula is based on the general formula and depends on the required performance of the formula.

The above recommended dosage is for reference, and good dosage shall be determined through a series of tests.

Adding method and processing guidance

Add while stirring to ensure good distribution, dispersion, efficiency and repeatability in application.