Our company is a global brand (DCS system) (robot system) (large servo control system) module spare parts sales, the company's product content is distributed control system (DCS), Programmable logic controller (PLC), ABB, AB, Bentley, Invensys, Woodward, Foxboro, Westinghouse, Ryan, Schneider Modicon, MOTOROLA, GE Fenuc, Yaskawa, Bosch Rexroth, ACSO, Rexroth and other major brands of DCS system accessories, robot system accessories, large servo system spare parts.

Xiamen Xiongba Electronic Commerce Co. LTD

FROM：Mr. Wei

E-Mail：2322181769@qq.com

TEL/WeChat:15396237607

The integrator module

The integrator module is a practical analog keyboard input tool. Modular design, can be set according to the actual demand of different input voltage, current, analog current and other parameters, and powerful. It's very easy to use, just type a few key characters. Input mode: Input voltage: 3V; Input current :5 A

If you need to inquire or purchase ,please send the product models to my email or call me directly .

Contact detail:Mobile/ WeChat/ WhatsApp:+86-15396237607

E-mail:2322181769@qq.com

QQ: 2322181769

First, the function of the integrator

Integrator module function is simple and practical, the interface is beautiful and generous, can use the touch screen operation. The integration process includes input, output, recording and storage. Simply put, after setting up a project, record it through the control integrator module, and then you can record the integration situation after the completion of the project." The integration process "is an integral part of the proper functioning of the system." The points process "is also an important measure of project completion." The result of the integral "can generally be obtained by setting. A simple measurement of the project will give you the specific results needed for the project, such as: number of projects completed -- number of tasks -- number of projects completed." The integrator allows you to observe and record the specific results required by the project. Integrators can be used to record specific results that need to be observed and completed.

Two, operation instructions

When the output signal of the integrator module is 3 V, 0 is displayed, indicating that there is no work.

3. Feedback of integrator test results

In the actual measurement, in order to measure the result accurately, it is necessary to test the real measurement value inside the integrator. The integrator test function is realized by simulating the keyboard input, so if the test only needs to input the correct simulation key parameters can be, in the process of testing may also meet some special requirements, so we need the integrator to solve this kind of problem. When feeding back the test result, perform the following steps: Step 1: Enter a value; Step 2: Click the set button on the key; Step 3: Set parameters and input according to the requirements on the parameters on the keyboard; Step 4: Click the key to end the whole test process. The following is the simple interface diagram of the integrator module operation (including some functional modules and some key configuration diagrams): The software operation process is shown as follows: Step 1: Click the key to end the test process, and check the corresponding parameter Settings on the simulated key under test. Step 2: Click the corresponding parameter on the button to save the modification (you can write code in Java language), and click the button again to save the modification information