project

Specifications

K100T-Ci

K100T-C

Overall dimension

400×245（mm）

LCD screen

7 inches, 800 × 480 resolution

control mode

KSSB serial servo bus

Command pulse

Axis control function

Maximum number of control axes: 4 axes

Maximum number of linkage axes: 3 axes

Shaft type: linear shaft, class a rotating shaft, class B rotating shaft, class C rotating shaft and class D rotating shaft

Shaft interlock, emergency stop, soft limit, hard limit

Preparation function

44 G codes, including positioning, linear interpolation, circular interpolation, thread cutting and interpolation, back reference point, coordinate system, tool compensation, cycle command, pause, etc

Interpolation function

G00、G01、G02、G03、G32、G34、G07.2、G78.1

Feed function

Maximum speed：60000mm/min

Maximum feed speed：30000mm/min

Fast magnification：F0、25％、50％、100％

Feed rate: 0-150% (16 gears)

High speed and high precision: front acceleration and deceleration control, 5 kinds of acceleration and deceleration curves and speed smoothing control

Reference point

Automatic return to reference point (G28), automatic return from reference point (G29), 2nd and 3rd reference points (G30)

Thread function

Pitch：0.01~500mm（metric system）、0.06~25400 Teeth / inch（British system）

Single head / multi head, metric / imperial straight thread, tapered thread, end face thread, equal pitch and variable pitch thread, circular arc thread

The length, angle and speed of thread tailing can be set

Digital spindle thread

Coordinate system and size

Minimum instruction unit：0.001mm

Maximum stroke：±99999999×Minimum instruction unit

Workpiece coordinate system G50，G54~G59

Diameter / half programming, absolute / incremental programming

Jump function

G31

Spindle function

Bus spindle: 1, analog spindle: 1, digital spindle: 1

Analog spindle: 1, digital spindle: 1

Gear control (S01 ~ S08), analog control (S5 digits), digital spindle control

Analog spindle automatic / manual shift, digital spindle positioning, and support the "speed / position" switching of digital spindle

Spindle magnification: 50 ~ 120% (Grade 8), analog voltage: 0 ~ 10V (stepless)

1-way spindle encoder feedback, and the number of encoder lines can be set

When the spindle is running, chuck control, table tail control, spindle constant linear speed control (G96 / g97), G93 tapping, spindle speed clamping, etc

Tool function

Number of tool offsets: 16 groups

Tool length compensation, tool radius compensation, tool wear compensation

Tool setting operation: absolute tool setting, relative tool setting, tool compensation adjustment, etc

Auxiliary function

Standard M code: 42

Special M code：M21~M24，M71~M74，M91~M94

Program storage and editing

Program capacity: 640K (built-in), expansion: direct U disk access (unlimited capacity), electronic disk: 3

Program programming: relative programming, absolute programming, mixed programming, decimal point programming

Program editing: program typing, modification, deletion, insertion, retrieval, copying, moving, merging, etc., U disk program editing

Multi segment MDI program editing and running

Subroutine call (maximum 63 levels of nesting)

Program check function

Fast graphic preview of program track, empty operation, single-stage operation, machine tool lock, auxiliary lock, program stop selection and program jump selection

Simplify programming functions

Single fixed cycle (G90 / G92 ~ G94), multiple fixed cycle (G70-G76)

Compensation function

Reverse clearance compensation: positioning, cutting clearance compensation can be set independently, range: 0-8mm

Pitch error compensation: 128 compensation points / shaft, compensation amount of each point: ± 0.1mm

interface

Language: Chinese, English

Graphics: tool path graphics

Current position, program, parameter setting and display, graphic setting and display, diagnostic data, alarm, timing, piece work, date, time, speed, etc

Index information: system operation list, G code list, parameter list, diagnosis list, macro instruction list, alarm list and other user-defined information

Alarm: P / s alarm, driver alarm, over range alarm, system error alarm, bus alarm (only available for servo bus system), external alarm, etc

Operation management

Operation mode: automatic, manual, input, edit, mechanical zero return, program zero return, single step (handwheel)

Program operation mode: automatic operation, MDI operation, DNC (USB flash disk, RS232) operation, empty operation, single section operation and handwheel control operation

Program switch, parameter switch, time limited shutdown, startup, parameter and program password protection

PLC function

Built in standard PLC

DI/DO（total）：40/24

External interface

Kssb servo bus interface (servo bus system only), feed shaft pulse interface (non bus system only), spindle encoder interface, analog spindle interface

Machine tool panel interface, additional panel interface and separation operation box interface

Di interface, do interface, tool holder interface

RS232 / 485 interface, USB interface

Adaptive drive

SD310 AC servo driver (optional absolute encoder)

SD300 AC servo driver

ZD210 spindle driver

ZD200 spindle driver