●New hardware platform, equipped with high-performance CPU, faster system speed.

●Integrated flat cast aluminum panel, oil and water proof, 8-inch color LCD.

●The maximum fast speed is 240 m / min and the maximum feed speed is 60 m / min.

●5 feed shafts and 2 servo spindles, which can be used for turning and milling compound models.

●The system is upgraded to two hand wheel and dual analog spindle interface.

●It has advanced functions such as spatial arc interpolation, imaginary axis interpolation, inclined plane assignment and so on.

●It has the functions of scaling, coordinate rotation, axis address replacement and so on.

●It has background editing to improve the efficiency of manual programming.

●It has the function of limit prediction to ensure that the tool stop is accurate and does not impact the travel limit.

●It has the function of moving overlap. When it is fast, it allows the amount of moving overlap between shafts to improve the processing efficiency.

●It has the functions of power failure and breakpoint management, which can quickly resume production.

●Standard Ethernet interface, with Kapi function, can be connected to knd's KWS data service system.

●With advanced diagnosis function, it provides servo online optimization, vibration detection and other functions to improve the machining performance of the machine tool.

●Open PLC, with built-in standard PLC program, has rich functions, safety and reliability, and can also be developed by ourselves.

●The local di / do is 48 / 32, which can meet the use of general machine tools, and the bus module can be expanded.

●It is equipped with 23 bit absolute encoder motor as standard, and the processing effect is better.

5

7

9

240 / 60 (M / min)

Bus spindle, analog spindle (2-way, expandable)

Simple PLC axis, pexc parallel controller

50M

G code A/ B system, including spot drilling, tapping, hole impact, high-speed deep hole, etc., digital spindle thread cycle(G78.1, G7.2)

Spatial three-point arc interpolation, spiral interpolation, polar interpolation, cylindrical interpolation, imaginary axis, inclined plane assignment, scaling, coordinate rotation brick, axis address replacement (G54.1), Cartesian coordinate system setting (G54.9)

Spindle proportional control SPRC, any axis Proportional Control RC

2D and 3D graphics functions

Graphic diagnosis, bus diagnosis, etc

Alarm history and important operation history. Exportable

Parameter collection, user-defined classification, USB flash disk backup and recovery

Maximum tool position 12 Tool offset (64), tool life management, etc

Built in standard PLC (KTC STD V3.0) 

Power off management and breakpoint management

Time limited protection function based on Network

Level 7 operation authority

K2000TF1i-D、K2000TF2i-D

8 inches

Integrated cast aluminum panel, mold key

KSSB

Front 2

Local IO: 48 / 32, SD 6 

2-way

2-way, 0-10V

Ethernet, RS232, RS485

SD310(20/30/50/75/100)

ZD210(2.2-45KW)

KA series 5-Pair motor, linear motor, torque motor, etc

Zjy asynchronous servo motor, motorized spindle, etc

Cc4025T5.2(F1)、Cc2633T.2(F2)

Buckle back mount