●Maximum 3 feed axes.

●Integrated panel, compact structure, suitable for economical lathe.

●7-inch TFT color LCD with resolution of 800 × 480。

●Kssb servo bus communication.

●The maximum fast speed is 60m / min and the maximum feed speed is 30m / min.

●Digital spindle can be configured to complete tapping, positioning, etc.

●Support the second generation of high-speed and high-precision.

●It has the functions of digital spindle thread and workpiece coordinate system.

●It has the functions of tip radius compensation and corner arc compensation.

●The number of native di / DOS is 40 / 24, which is scalable.

●Support pitch compensation to improve the accuracy of the machine tool.

●With Ethernet interface.

●Equipped with SD series bus servo driver, zd210 spindle drive, absolute value encoder motor.

K1TCi

400×245（mm）

LCD screen

7 inches, 800 × 480 resolution

KSSB servo bus

Maximum number of control axes: 4 axes

Maximum number of NC axes: 3 axes

Shaft type: linear shaft, class a rotating shaft, class B rotating shaft, class C rotating shaft and class D rotating shaft

Shaft interlock, emergency stop, soft limit, hard limit

43 g codes, including positioning, linear interpolation, circular interpolation, thread cutting and interpolation, back reference point, coordinate system, tool compensation, cycle command, pause, etc

G00、G01、G02、G03、G32、G34、G07.2、G78.1

Rapid feed (G00), feed per minute (g98), feed per revolution (G99), pause (G04)

Maximum speed: 60000mm/min

Maximum feed speed:30000mm/min

Maximum feed speed:F0、25％、50％、100％

Feed rate: 0 ~ 150% (16 gears)

High speed and high precision: front acceleration and deceleration control, 6 kinds of acceleration and deceleration curves and speed smoothing control

Automatic return to reference point (G28), automatic return from reference point (g29), 2nd and 3rd reference points (G30)

Pitch: 0.01 ~ 500mm (metric system), 0.06 ~ 25400 thread / inch (British system)

Single head / multi head, metric / imperial straight thread, tapered thread, end face thread, equal pitch and variable pitch thread

The length, angle and speed of thread tailing can be set

Digital spindle thread

Minimum instruction unit: 0.001mm

Maximum stroke: ± 9999999 × Minimum instruction unit

 Workpiece coordinate system G50，G54~G59

Diameter / half programming, absolute / incremental programming

G31

Analog spindle: 1, digital spindle: 1

Gear control (S01 ~ S08), analog control (S5 digits), digital spindle control

Analog spindle automatic / manual shift, digital spindle positioning, and support the "speed / position" switching of digital spindle

Spindle magnification: 50 ~ 120% (Grade 8), analog voltage: 0 ~ 10V (stepless)

1-way spindle encoder feedback, and the number of encoder lines can be set

When the spindle is running, chuck control, table tail control, spindle constant linear speed control (G96 / g97), G93 tapping, spindle speed clamping, etc

Number of tool offsets: 16 groups

Tool length compensation, tool radius compensation, tool wear compensation

Tool setting operation: absolute tool setting, relative tool setting, tool compensation adjustment, etc

Standard M code:42个

Special M code:M21~M24，M71~M74，M91~M94

Program capacity: 640K (built-in), expansion: direct U disk access (unlimited capacity), electronic disk: 3

Program programming: relative programming, absolute programming, mixed programming, decimal point programming

Program editing: program typing, modification, deletion, insertion, retrieval, copying, moving, merging, etc., U disk program editing

Multi segment MDI program editing and running

Subroutine call (maximum 63 levels of nesting)

Fast graphic preview of program track, empty operation, single-stage operation, machine tool lock, auxiliary lock, program stop selection and program jump selection

Single fixed cycle (G90 / G92 ~ G94), multiple fixed cycle (G70 ~ G76)

Reverse clearance compensation: there are three kinds of clearance compensation: positioning, cutting and non positioning cutting, with the range of 0 ~ 8mm

Pitch error compensation: 128 compensation points / shaft, compensation amount of each point: ± 0.1mm

Language: Chinese, English

Graphics: tool path graphics

Current position, program, parameter setting and display, graphic setting and display, diagnostic data, alarm, ladder diagram, timing, piece work, date, time, speed, etc

Index information: system operation list, G code list, parameter list, diagnosis list, macro instruction list, alarm list and other user-defined information

Alarm: P / s alarm, driver alarm, over range alarm, system error alarm, external alarm, etc

Operation mode: automatic, manual, input, edit, mechanical zero return, program zero return, single step (handwheel)

Program operation mode: automatic operation, MDI operation, DNC (USB flash disk, RS232) operation, empty operation, single section operation and handwheel control operation

Program switch, parameter switch, time limited shutdown, startup, parameter and program password protection

Open standard PLC

DI/DO（total）：40/24

Feed shaft pulse interface, spindle encoder interface, analog spindle interface

Machine tool panel interface, additional panel interface and separation operation box interface

Di interface, do interface, tool holder interface

RS232 / 485 interface, USB interface, Ethernet interface

SD030 AC servo driver

ZD210 spindle driver