biomass briquette machine, buy Factory sale best quality sawdust,wood chips wood briquette machine/wood briquette making machine/wood charcoal production line on China Suppliers Mobile

Product Details

Factory sale best quality sawdust,wood chips wood briquette machine/wood briquette making machine/wood charcoal production line

Product Description

1. working flowchart and support machine of the wood briquette making machine

1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
5. Carbonized the briquette stick

raw material of the wood briquette making machine could be :

Almost any biomass can be briquetted. Briquetting plants set so far in India are using Saw Dust, Bamboo dust, Bagasse, Cotton Stalk, Coffee husk, Groundnut Shell, Mustard Husk/Stalk, Pine Needles, Rice Husk, Sugar Mill Waste, Jute waste, Coir pith and other wastes & residues like Castor Shell, Red Gram Stalk, Tobacco stem, Tea Waste, Sander Dust, Tree Bark, Wild Grasses & Shrubs and Sander dust etc. can be also be briquetted individually or in combination without using any binder.

Crushing Machines ( support machine of the charcoal making machine)

For proper working of biomass briquette press and drying machine in the biomass briquetting plant, size of biomass waste is important. There are two types of crushing machine available for make suitable size sawdust or biomass grain for following drying machine and biomass briquette press...

Sawdust Drying Machine( support machine of charcoal making machine)

In the biomass briquette plant, when wet raw material is input into the hopper of dryer, the hot air stove(boiler) generates hot air, hot air mixed with wet sawdust and then sucked into the pipes by the exhaust blower(fan) , flowing and go though the curving pipes and drying chamber of dryer, thus the wet sawdust is dried, and the dried sawdust is discharged from the outlet with air lock

wood briquette making machine ( support machine of the charcoal making machine)

1.introduction of the wood briquette making machine( the support machine of the charcoal making machine)

the wood briquette extruder machine is designed to press wood waste into bar of diameter50- 80mm and length 45-50cm.

If you need large capacity, one single machine can not meet your need, you can choose several sets of single machine, or use the automatic production line, the automatic production line have a large capacity ( from 800kg-2500kg/h),and it will save many workers and cost.
Our automatic line include the main machines and auxiliary Machinery .the main machine (several sets of single briquette machine) Auxiliary machine (material distributor, screw conveyor, belt conveyor, smoke disposal system, cool conveyor.

Model	Power (kw)	Capacity (t/h)	Weight (t)	Machine size (m)	Package Size (m)	Finished briquette diameter (mm)
ZBJ50-9	18.5	0.15-0.2	0.55	2.20.61.3	1.820.661.73	50
ZBJ50-10	22	0.26-0.34	0.7	2.40.71.4	1.820.661.73	50
ZBJ50-C	22	0.24-0.3	0.75	2.70.71.55	1.820.661.73	50
ZBJ60-9	22	0.18-0.22	0.65	2.40.71.35	1.680.721.25	60
ZBJ70-9	22	0.24-0.28	0.73	2.40.71.4	1.890.81.42	70
ZBJ80-9	22	0.24-0.28	0.73	2.40.71.4	1.890.81.42	80

2. the final product of the wood briquette making machine ( the support machine of the charcoal making machine)

The final bio-fuel briquette is made by the advanced biomass briquetting machine. Almost all type of Agro-Forestry waste can be used, After the processing of drying, compressing under the high pressure and temperature, the biomass briquette is characterized by high density, small in size, better combustion, capable as the substitute for the superior coal or firewood. This bio-fuel briquette is 45-80mm in diameter, occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole

through the body.

As the need of pollution free environment, the product has a large scope of marketing. The briquettes can be used as a substitute of any fuel in following fields :
Boilers : It can be used in the boilers of Paper Mills, Sugar Mills, Dyeing houses, leather, lamination industries, Vanaspati units, Food Processing Units, Oil Extraction Units, Solvent Extraction Plant and many other plants and industries..
Furnace & Foundries : It can be used for metal heating & melting (where melting point is less than 1000d/cel.)
Brick Kilns : It is the total, substitute of steam coal.
Residential & Commercial Heating : For winter heating in Cold areas and Hotels, Canteens, Cafeterias and house hold kitchen appliances etc.

3. working principle of wood briquette making machine ( the support machine of the charcoal making machine)

Using the intrinsic attributes of the wood material, by spiral extruding at high temperature, under high pressure, wood element in wood material becomes plastic and makes the fine fiber combine, and then stick solid fuel is formed.

carbonization stove ( support machine of the charcoal making machine)

Packing and shipment

For the single machine, we use the plywood cases for packing, and for the whole container machine, we will ask the shipping company send one container to our factory and we will loading ourself, to make sure the machine are carefully loading and delivery

FAQ

1. what's the raw material can be use for making charcoal briquettes ?

wood( wood log, wood branches, wood chips), rice husk, peanut shell, bamboo, coconut shell, palm shell, bagasse etc. if you have more special material, please send enquiry to us.

2. what's totally machines include complete line?

usually, the totally line machine include: wood crusher, dryer, briquette machine and charcoal furnace, but there are different ways to making charcoal, we will according to your raw materials design the best way to producing charcoal.

3. what's the pressure of briquette machine, need binder?

the briquette machine pressure is 80T, there is no need any binder, the machine principle is high temperature and high pressure screw press.

4.For the charcoal furnace/stove, is there any smoke to pollute the environment?

there are the smoke during the process of making charcoal, but we have the smoke disposal system can reuse the smoke, during the process there will be combustible gas produce, it can use for the machine self.

environmental and economic.

5.What' the machine quality guarantee?

there are 1 year free guarantee for main machine.