Product Details

pneumatic bump test system

KCT20 series pneumatic bump test system, has replaced the traditional mechanical cam type bump table, is applied to electronic components or devices and other electric and electronic products that are subjected to repetitive shock in use or transportation.

Functions and features:

◆Full air pressure driving bump, clean and environmentally friendly, good repeatability and high reliability;

◆ The bump frequency can be controlled by adjusting the air pressure, the bump frequency is continuously adjustable, the system is more stable and reliable, the bump frequency is high, and the software operation is convenient;

◆ The test time and bump frequency times can be set arbitrarily, and the test system will automatically stop after the test is completed, which is convenient for users to operate;

◆The controller has door protection, flywheel protection and zero signal protection, to ensure system safety;

◆ The drop height is adjustable. Use computer control measurement system.

When the pulse width is fixed, you only need to input overload value, the drop height will be automatically adjusted by the computer, and the adaptive adjustment of the bump process can be realized, to ensure the repeatability of the bump overload.

Technical parameter:

Model	KCT20-50	KCT20-100	KCT20-200	KCT20-500	KCT20-1000	KCT20-1500	KCT20-200
Load (kg)	50kg	100kg	200kg	500kg	1000kg	1500kg	2000kg
Table size (mm)	500* 500	600* 600	800* 800	1000* 1000	1200* 1000	1200* 1200	1500* 1500
Shock waveform	Half sine wave
Peak acceleration (m/s²)	30~ 1500	30~ 1000	30~ 1000	30~ 1000	30~800	30~600	30~500
Pulse duration (ms)	30~2	30~2	30~3	30~6	30~6	30~6	30~6
Max. frequency times (times/min)	120	120	100	80	80	60	60
Bump distance automatic adjustment (mm)	150 mm	150 mm	180 mm	180 mm	200 mm	200 mm	200 mm
Overall dimension (mm)	1000* 1000* 1000	1100* 1100* 1000	1200* 1200* 1100	1300* 1300* 1200	1500* 1500* 1300	1500* 1500* 1300	1500* 1500* 1300
Weight (kg)	1000	1200	1500	2000	2500	3000	3500
Power supply requirements for Table	AC 220V±10%, 50Hz, 2kVA
Power supply requirements for Air compressor	AC 220V±10%, 50Hz, 3kVA or AC 380V±10%, three-phase, 50Hz, 5kVA
Air source conditions	Air source output pressure is not more than 1.0Mpa. If there is no air source in the lab, air compressor needs to be configured; If there is air source in the lab, and there is a high requirement on the bump frequency times, it needs to configure a corresponding air storage tank.
Environment	Temperature: 0~40℃, humidity: ≤90% (25℃), non condense

Notes: Two kinds of configurations are for all models, ground foundation needed and ground foundation free, users can choose according to the requirements.