Product characteristics of [pin wire tension bending tester]

1. Applicable to Clause 4.3 of GB/ T14472;

2. Lead wire tensile bending test for multiple capacitors or other components;

3. Using Panasonic PLC to control the stepping motor;

4. Display and set parameters of the color touch screen;

5. It can be customized according to the customer's needs.

Product brief introduction of [pin wire tension bending tester]

The testing machine gets rid of the traditional manual test method of the pin line of electronic components. The equipment adopts 7-inch color touch screen as the man-machine interface. The Panasonic PLC control system and the high-performance step-by-step driver control power source produced by the advanced technology of IMS Company of the United States make the whole machine test accurate positioning, good timing and stable performance; It also has humanized functions such as power-off memory (some parameters), error warning, experimental cue tone and so on.

Technical parameters of [pin wire tension bending tester](non-standard customizable)

1. Tension test: manual vertical loading of weights;

2. Tension loading time: 0 / 999s can be set continuously;

3. Bending test: bending one lead at a time;

4. Bending angle: 0-90 degrees adjustable, precision: ±2 degrees;

5. Operation period:1 s ~ 10 s/ times (bending angle:30 degrees,45 degrees,90 degrees), accuracy:%3%;

6. the bending times:1 to 999 times; the precision is 1 to 999 times;

7. Torsion: it can be continuously twisted by 180 degrees; the accuracy is 2 degrees;

8. Load weight: 0.5N, 1N, 1.25N, 2.5N, 5.0N, 10N, 20N, 40N, and accuracy:1.1%; (can be customized according to the requirements of the user, and the operation method is described by the common weight);

9. Power source: stepping motor;

10. Controller: PLC (model: FP-X0 L14R);

11. Display and operation: 7-inch color touch screen (model: TK6070i);

12. Working station:1 position;

13. Form Factor: about 550L*300W*600H (mm);

14. Working power: 220V,10%,50/60 Hz, and 2 Hz.

Maintenance and regular maintenance of [pin wire tension bending tester]

Maintenance:

In order to prevent electrical shock, please do not lift the lid of the instrument. All parts in this instrument need not be maintained by the user. If the instrument is abnormal, please seek maintenance from our laboratory. The attached circuit and block diagram are for reference only.

Regular maintenance:

The AC power supply, input power cord accessories and so on must be carefully checked and checked at least once a year to protect the safety of the user and the accuracy of the instrument.

For more information about products, please contact us and visit the company.

Address: Tianhui Road, Wisdom City, Tianhe District, Guangzhou

Tel: 86-20-37896688

Fax:86-20-37896699

Mobile phone: 86-13711272581,Miss Liu

Web site: