Product characteristics of [programmable apparatus switch durability test-bed]

1. Test requirements for compliance with GB15092.1-2010 standar；

2. Using Panasonic PLC to control the stepping motor;

3.7-inch color touch screen display and setting parameters;

4. External control signal (start and stop), count pulse output (pulse width 0.2 S);

5. Equipped with test fixture;

6. Non-standard customization can be made according to the customer's needs.

Product brief introduction of [Programmable apparatus switch durability Test-bed]

This test-bed uses Panasonic PLC to control the operation of stepping motor and carries out on-off life test of various electrical accessories (such as ship-shaped switch, key-press switch, rotary switch, adjustable potentiometer, etc.). The equipment is equipped with two stepping motors, which can produce accurate linear motion and rotating motion, and adopts 7-inch color touch screen operating interface, which can be set digitally for various test parameters. Model 905D programmable apparatus switch durability test-bed is an easy-to-operate, multi-functional, high-precision test equipment.

Technical parameters of [programmable apparatus switch durability test-bed] (customizable)

1. Linear motion

(1) number of times of on and off: 1 ~ 99999 times.

(2) its accuracy: ±1 time.

(3) Test speed range: 0.1 ~ 1mm.

(4) its accuracy: ±5%.

(5) retention time range (front end, back end): 0.1 x 60s.

(6) Its accuracy is: 0.1 s.

(7) range of travel length: 0 ~ 40.0mm.

(8) its accuracy: ±1 mm.

2. Rotating motion

(1) number of test times (cycles): 0 / 99999 (times or cycles).

Its accuracy: ±1 (secondary or circle).

(2) rotational velocity: 0.5 / 2 (°/ s).)

Its accuracy: ±1.0 (°/ s).)

(3) residence time range of each rotation gear: 0.1 ~ 60 s.

Its accuracy: ±0.1 s.

(4) rotation number: 0 ~ 6 (shift). (note: set 0 to rotate clockwise)

(5) each angle setting: 0 ~ 360 (degrees).

Its accuracy: ±1 (degree).

3. Parameter setting mode: digital setting;

4. Local self-start and stop or external control to start and stop (continuous signal);

5. Count pulse output (24VDC output 0.1s);

6. 2 stepping motors;

7. Operation interface: 7-inch color touch screen, menu operation.

8. Fixture: one set;

9. Working power supply: 220V ±10%, 50Hz ±2Hz;

10. Comply with the requirements of Standard GB 15092.1 / 2010 Appliances and switches-part 1: general requirements.

Maintenance and regular maintenance of [programmable apparatus switch durability test-bed]

Maintenance:

In order to prevent electrical shock, please do not lift the lid of the instrument. All parts in this instrument need not be maintained by the user. If the instrument is abnormal, please seek maintenance from our laboratory. The attached circuit and block diagram are for reference only.

Regular maintenance:

The AC power supply, input power cord accessories and so on must be carefully checked and checked at least once a year to protect the safety of the user and the accuracy of the instrument.

For more information about products, please contact us and visit the company.

Address: Tianhui Road, Wisdom City, Tianhe District, Guangzhou

Tel: 86-20-37896688

Fax:86-20-37896699

Mobile phone: 86-13711272581,Miss Liu

Web site: