Characteristics of [AC capacitor durability test rig]

1. It can satisfy durability test and impact test.

2. Program control, achieve automatic test process, parameters on the touch screen set and display, parameter power loss memory;

3. Automatic detection capacity, automatic compensation reactance, automatic voltage regulation, voltage automatic adjustment (range of 10% can be set);

4. 4. Real-time monitoring of line current, when the capacitor capacity changes in the test process, the instrument will automatically reduce the voltage, re-compensate reactance and then boost up to continue the test; 5. Automatic reactance compensation reduces input current and reduces equipment energy consumption. Multi-channel output, real-time monitoring of individual channel voltage, current; 7 . Voltage 0 V starting, overvoltage, undervoltage, overcurrent and other safety protection functions; 8. Equipped with test fixture; 9. Can be customized according to customer requirements.

Introduction to [AC capacitor durability test rig]

55XX series AC capacitor durability test-bed adopts Panasonic PLC and Panasonic A / D conversion module for control and parameter measurement (FP-X0 L40R), Taiwan Willentong 10-inch color touch screen (TK6102iH) display and setting, all kinds of parameters power-off memory; Humanized interface, easy to operate. The instrument also has the functions of automatic voltage regulation, automatic compensation reactance, automatic correction of test voltage, automatic timing, 10-channel current display, test on-off and over-current protection, etc., to ensure the safety and reliability of the instrument. This instrument has the advantages of simple operation, good performance and high reliability. This device Is suitable for AC capacitor durability test and impact test equipment.

Technical parameters of [AC capacitor durability test rig] (non-standard customizable)

Key performance indicators:

1. The equipment can achieve durability, impact test function;

2. Total capacity range: 500 μ F, maximum single channel 100 μ F;

3. Test voltage maximum output: 700V, can be set by the key;

4. Test voltage display accuracy (V): ±2.5%, ±3 words, resolution 1 V;

5. Capacitance current, line current display accuracy (A): ±3%, ±3 words;

6. Device output load path: 10 channels of output, LCD display can show each output test current;

7. Test time: 0 / 9999.9h, can be set After the test time is over, the test stops; and there is a sound alarm, the parameter power-off memory;

8. Impact test on and off time: 2? 99s, can be set;

9. Impact test times: 1: 99999, can be set;

10. Each parameter adopts large touch screen display, operation and setting.

Function:

1. Automatic pressure regulation;

2. Automatic compensation reactance;

3. Due to the change of power supply, the test voltage can be adjusted automatically; range: 3 ~ 10%;

4. Real-time monitoring line current, each channel capacitance current;

5. With 0 V start-up;

6. Overcurrent protection;

7. Under-voltage protection, input voltage lower than 198V protection;

8. Working power supply: 240V ±10%, 50Hz ±2Hz.

9. Cabinet height: about 170cm, color: Hua for gray, see figure 2;

10 equipment weight: about 1000kg .

Maintenance and regular maintenance of [AC capacitor durability test rig]

Maintenance:

In order to prevent electrical shock, please do not lift the lid of the instrument. All parts in this instrument need not be maintained by the user. If the instrument is abnormal, please seek maintenance from our laboratory. The attached circuit and block diagram are for reference only.

Regular maintenance:

The AC power supply, input power cord accessories and so on must be carefully checked and checked at least once a year to protect the safety of the user and the accuracy of the instrument.

For more information about products, please contact us and visit the company.

Address: Tianhui Road, Wisdom City, Tianhe District, Guangzhou

Tel: 86-20-37896688

Fax:86-20-37896699

Mobile phone: 86-13711272581,Miss Liu

Web site: