Product characteristics of [switch life tester]

1. Mitsubishi PLC control system, color touch screen display and operation;

2. Humanized interface, digital test parameters, intelligent man-machine dialogue, make the working state clear at a glance, simple keystroke operation;

3. The quick clamp is convenient for all kinds of switches and can be applied to all kinds of ship types and warping plate switches.

Product introduction of [switch life tester]

The 904J switch life testing machine can be used to test the fatigue life of all kinds of electronic products, electrical equipment, wall switches and other ship type switches and warping plate switches, and to facilitate the quick clamping of all kinds of switches with the fast fixture. If add large current test module can carry on the load test, simulate the actual use condition. She uses Mitsubishi PLC control system, through the 4.3in color touch screen operating interface to control; test parameters digitization, man-machine dialogue intelligent, make the working state at a glance, simple key operation, will learn.

Technical parameters of [switch life tester] (customizable)

Input characteristics：

1. Input voltage: DC 24V;

2. Working environment: temperature: 5 ℃ ~ 30 ℃, humidity: less than 75% RH, no dust;

3. Power supply capacity: equipped with two power adapters: input 220V/50HZ output 24V / 2A;

4. Dimensions: 380 (L) * 250 (W) * 340 (H) mm;

5. The weight of the whole machine is about 8 kg.

Qualification：

1. Applicable products: ship type switch, warping plate switch;

2. Driving mode: stepping motor;

3. Maximum itinerary: 100 mm;

4. Maximum speed: 100mm;

5. The number of measurements: 1) 9999999 (with power-off memory);

6. Test station: 1;

7. Operation interface: 4.3 inch color touch screen;

8. Quick clamp: the clamp has a rubber tooth, the length of the rubber tooth is 100 mm, and the opening width is 90 mm.

Maintenance and regular maintenance of [switch life tester]

Maintenance:

In order to prevent electrical shock, please do not lift the lid of the instrument. All parts in this instrument need not be maintained by the user. If the instrument is abnormal, please seek maintenance from our laboratory. The attached circuit and block diagram are for reference only.

Regular maintenance:

The AC power supply, input power cord accessories and so on must be carefully checked and checked at least once a year to protect the safety of the user and the accuracy of the instrument.

For more information about products, please contact us and visit the company.

Address: Tianhui Road, Wisdom City, Tianhe District, Guangzhou

Tel: 86-20-37896688

Fax:86-20-37896699

Mobile phone: 86-13711272581,Miss Liu

Web site: