Product characteristics of [weldability testing machine]

1. The equipment is a special equipment for the weldability test of components;

2. Mitsubishi PLC control system, color touch screen display and operation;

3. Using power supply AC 220V ±10%, 50Hz / 60Hz, 2A;

4. The magnetic suction device is convenient for quick and integral removal and installation of the special sample clamp.

5. Rear panel has equipment power input interface and input specification label.

Product introduction of [weldability testing machine]

984 A weldability tester was designed and manufactured according to GB/T21041-2007 (equivalent to IEC60384-21:2004) clauses 4.9 and 4.10 (weld groove method). The device is a special equipment for the weldability test of components. It adopts Mitsubishi PLC control system and controls it through the operation interface of 4.3inch color touch screen. Digital test parameters, intelligent man-machine dialogue, make the working state clear at a glance, simple key operation, will learn.

Technical parameters of [weldability testing machine] (customizable)

Input characteristics：

1. Input voltage: AC 220V,10%, 50Hz/ 60Hz, 2A;

2. Working environment: temperature: 5 ℃ ~ 30 ℃, humidity: less than 75% RH, no dust;

3. Power supply capacity: 500W;

4. Form factor: 460 (L) X360 (W) X420 (H) mm;

5. The weight of the whole machine: 40.

Qualification：

1. Applicable criteria: GB/T21041-2007 (equivalent to IEC60384-21:2004);

2. Applicable products: weldable components;

3. Driving mode: stepping motor (rated holding torque 2.2N.M);

4. Impregnation speed: 3 mm and 30 mm, resolution 1 mm;

5. Exit speed: 3mm, 30mm, resolution: 1mm;

6. Dipping distance: 1 ~ 20 mm, precision ±1 mm;

7. Immersion welding time: 1: 99 s, error less than 1 s (satisfy 2 s ±0.2 s);

8. Test station: 1;

9. Operating system: PLC operation, color touch screen operation interface;

10. External equipment: immersion welding machine (lead-free soldering furnace);

11. Temperature control range: normal temperature ~ 600 ℃ > 1% FS;

12. Tin slot size: 100 × 140 × 45 mm;

13. Molten tin content: 4.5 kg;

14. Power: 900W.

Maintenance and regular maintenance of [weldability testing machine]

Maintenance:

In order to prevent electrical shock, please do not lift the lid of the instrument. All parts in this instrument need not be maintained by the user. If the instrument is abnormal, please seek maintenance from our laboratory. The attached circuit and block diagram are for reference only.

Regular maintenance:

The AC power supply, input power cord accessories and so on must be carefully checked and checked at least once a year to protect the safety of the user and the accuracy of the instrument.

For more information about products, please contact us and visit the company.

Address: Tianhui Road, Wisdom City, Tianhe District, Guangzhou

Tel: 86-20-37896688

Fax:86-20-37896699

Mobile phone: 86-13711272581,Miss Liu

Web site: