Hard Turning Bearing steel Wind Power Bearings with Halnn supplier CNMN120708 CBN Tool
USD $20 - $30 /Piece
Min.Order:10 Pieces
Hard Turning Hardened Steel Wind Power Bearings with Halnn Manufacture CBN cutting inserts
Finish Turning Bearing steel Wind turbine bearing with Halnn Manufacture CBN Turning inserts
Fine Finish Turning GCr15SiMn Hardened Steel bearing with Halnn distributor TNGN110304 CBN tips
Finish Turning Bearing steel Wind Power Bearings with Halnn distributor CBN tool
Heavy Interrupt Cutting Hardened Steel Wind Power Bearings with Halnn supplier CBN Inserts
Hard Turning Bearing steel Wind Power Bearings with Halnn supplier CNMN120708 CBN Tool
1. Halnn Tools CBN Tool Hard Turning Bearing steel Wind Power Bearings
The simple processing technology of bearing steel is smelting - casting - annealing - roughing - quenching - finishing. The hardness of the workpiece after quenching and tempering is generally above HRC45. For high hardness bearing steel parts, traditional tools (hard alloy tools and ceramic tools) can no longer meet the processing requirements. At present, the tool materials suitable for processing high-hardness bearing steels are ceramic tools and cubic boron nitride tools. The disadvantages of cubic boron nitride cutters are as brittle as ceramic cutters, but cubic boron nitride cutters have certain impact resistance compared to ceramic cutters. Their high hardness, high strength and good wear resistance make them processed. The main tool material for high hardness bearing steel. In particular, the non-metallic binder cubic boron nitride tool developed by Halnn Tools has broken the statement that cubic boron nitride tools can only process workpieces with small feed rate and cannot cut intermittently.
2. Characteristics of CBN Tool
Insert Grade | Suited Materials | Machining Type | Typical Application |
BN-S20 | Hardened Steel, Heat and abrasive resistant steel, High manganese steel | Roughing, Semi-Finishing | HSS Rolls, Ball Screw, Wind Power Bearings |
BN-S200 | Hardened Steel, Superalloy | Finishing | Wind Power Bearings |
BN-H11 | Hardened Steel | Semi-Finishing, Finishing | Bearings, Gears, Gear Shaft, Hardened Mold |
BN-H20 | Hardened steel, other materials of difficult to machine | Semi-Finishing, Finishing | Hardened Steel Gears, Mold,ect |
BN-H10 | Hardened Steel, high strength cast iron | Finishing | Bearings, Gears, Gear Shaft, High hardness component |
BN-H21 | Hardened Steel | Finishing | Bearings, Gears, Gear Shaft, Mold,ect. |
3.Detailed date of CBN Tool
Type | Dimension | Grades | |||||
L(mm) | φI.C(mm) | S(mm) | r(mm) | BN-K1 | BN-S20 | BN-S200 | |
CNMN120708 | 12.9 | 12.7 | 7.94 | 0.8 | ● | ● | ● |
CNMN090408 | 9.7 | 9.525 | 4.76 | 0.8 | ◎ | ◎ | |
CNMN090412 | 9.7 | 9.525 | 4.76 | 1.2 | ◎ | ◎ | |
CNMN120404 | 12.9 | 12.7 | 4.76 | 0.4 | ● | ● | ● |
CNMN120408 | 12.9 | 12.7 | 4.76 | 0.8 | ● | ● | ● |
CNMN120412 | 12.9 | 12.7 | 4.76 | 1.2 | ● | ● | ● |
CNMN120416 | 12.9 | 12.7 | 4.76 | 1.6 | ● | ● | ● |
CNMN120704 | 12.9 | 12.7 | 7.94 | 0.4 | ● | ● | ● |
CNMN120712 | 12.9 | 12.7 | 7.94 | 1.2 | ● | ● | ● |
CNMN120716 | 12.9 | 12.7 | 7.94 | 1.6 | ● | ● | ● |
4.Application Case
BN-S200 Solid CBN Insert processing bearings | |||
Machining Part: Raceway and End Surface | |||
Workpiece Hardness:HRC55-62 | |||
Cutting Type:Dry Cutting | |||
Machining Materials:42CrMoa4 | |||
Inserts Grade:BN-S200 RCGX090700 | |||
Cutting Parameters | |||
Inserts Materials | Vc (m/min) | Ap(mm) | Processing effect |
Halnn BN-S20 | 140-180 | 1mm | Surface roughness reaches Ra0.4 |
5. Image
6.Product packaging
If you have another question, pls feel free to contact us as below:
Contact us | |
Joanan@halnntools.com | |
+86 17537165259 | |
Skype | Joanna Guo |
+86 17537165259 |