Delivery Time:30 Days
Certification:ISO9001 / impeller Head Patent
LD700 Shot Blaster Machine For Small Castings Forgings Stampings 1. Function Metal castings surface sand removing and cleaning Black metal work-pieces surface rust removing and cleaning Stampings surface and sharp edges smoothing Forgings and heat-treatment work-pieces burrs removing Springs and gears surface descaling Surface particle refining and reinforcement

2. Application Field

Casting, heat-treatment, motor making, machine accessory making, bicycle parts making,

          auto parts making, non-ferrous metal die-casting, etc.

Former process for metal work-pieces surface blackening, blueing, passivation Good base process for electroplating and painting 3. Main Components  Material loading crane Blasting assembly Cleaning room Crawler device Splitter Hoister for splitter Dust collector PLC electrical control system 4. Working principle Reducer drives the loading crane to load the work-piece hopper and sends the work-pieces           into the cleaning room. The shots from impeller head blasts on the work-pieces in the cleaning room for cleaning and           reinforcement. The shots and waste sands goes into the hoister and be sent to the splitter for separating. The splitted clean shots goes into the impeller head for work again. The waste sands goes out from waste pipe and for reuse. The dust sucked by blower to dust collector, filtering clean air out and dust to the dust           collecting box which can be cleaned regularly. 5. Main Parameters​

Description	LD700 Shot Blaster Machine For Small Castings Forgings Stampings
Model No.	LD700
Total Dimension	1300*1500*3200 MM
Impeller Head Power	10 HP (7.5 KW)
Shots Sending	360 KGS/MIN
Impeller RPM	3200 R/MIN
Shots Intitial Speed	78 M/S
Working Box Pad Dia.	700 MM
Working Capability Per Time	≤300 KG
Crawler Crane Loading Capability	≤800 KG
Total Power	10.5 KW
Electrical Controlling	PLC (Delta)

6. Features & Advantaes of Our Shot Blaster Machine

Taiwan technology Core components all sourced from Taiwan. 3-5 times of lifespan than nomal shot blasting machine. Use Taiwan high wear-resistance impeller head, wear-resistant parts can be used for 1500-           2500 hours. Main shoting room use high wear & blasting resistant steel guard plate, high chromium           molybdenum alloy with 26.5-28% chromium. Lifespan 2-3 years. Vice shoting room use high Mn alloy steel guard plate, lifespan 10 years. Belt use recently developed Taiwan high wear-resistance rubber belt with reinforcing steel           wire layer, no joint. Lifespan 2 years. Every import transmission parts have proximity switches to avoid further work when there is           any fault. Pulse bag dust collector collecting bag and electro-magnetic pulse valve from Taiwan. Winnowing splitter inside special design give 99% splitting rate. Pneumatic controller controls 

          shots uniform flow, avoiding too much shots destroy motor or too less shots cant work well.

Conveyor and helix power adopt Taiwan Chengbang reducer. Conveyor lifespan 2 years,

          helix lifespan 7200 hours.

PLC electrical control system. 7. Photos