Delivery Time:45 Days
Certification:Qualified

Casting Cleaning Hanger Type Shot Blasting Machine for Core Removal

Hanger Type Shot Blaster Machine Description

Hanger Spinner shot blaster machines are the solution for batch blasting of small to medium size parts which are suitable for hanging upon a multi arm jig suspended by hook arrangement in the roof of the machine. The machine is typically supplied with an external beam arrangement allowing the operator to load / unload safely. An alternative “Y” track arrangement will also allow the operator to load a second jig whilst the first jig is going through the blasting cycle ensuring loading times are minimised.

During the blast cycle the jig is rotated through 360º and oscillated to ensure that all faces are cleaned. Timed door interlocks prevent the operator opening doors either during the blast process or for a short period of time after the completion of the blast cycle to ensure operator safety.

Structure of Hanger Type Shot Blaster Machine

Items	The main parts
Blasting Chamber	Chamber cover, liners, end plate, manual door, etc
Blasting Wheel	Blasting Wheel, Motor, Pulley, Triangle Belt, Base Plate, Etc
Elevator System	Cover, Elevator Belt Assembly, Pulley, Drive, Tight Device, Etc
Separator System	Separator, Shot Bucket, Etc
Screw conveyor	Screw shaft, blades, bearing base, etc
Hanger Hook System	double track, crane etc
Pneumatic System For Shot	Shot gate, cylinder, shot- slip pipe, air processor, etc
Electronic Control System	Control cabinet (conventional electronic control), the second line, etc
Dust Collector System	Bag type dust collector , sedimentation tank, piping, blower, etc

Hanger Type Shot Blaster Machine Advantage

1. Improving anti-fatigue character of mechanical products and steel structure parts.
2. Removing stress concentration
3. Extending its wear life.
4. Optimize surface technology state of work pieces.
5. Increasing cleaning efficiency enormously.
6. Reducing labour strength of cleaning job.
7. Reducing environmental pollution.​

Hanger Type Shot Blaster Machine Operation

1. Start the fan of the dust collector.

2. Start the elevator, blasting wheel and shot supply valve in turn. 

3. Then lower one hanger hook, loading the workpieces. And the hanger hook go into the blasting chamber along the track. And close the door of blasting chamber.

4. The hanger hook makes the workpieces alternating motion and rotating to cleaning and strengthening the workpieces.

5. During this working period, loading the following workpieces onto the other hanger hook.

6. After the machine stop completely, open the chamber door, unload the workpieces. 

7. Then the other hanger hook go into the blsting chamber along the track.

8. Emergency stop switch is for emergency situation. The whole machine will stop immediately after pressing the button.

9. Dust collector should be stop timely after finish all the duty.

Notice and Maintenence

1. Regularly cleaning the collect box of the dust collector to protect the dust removing pipe from blacking.

2. Cleaning the bottom of the blasting room and the separator frequently.

3. Often cleaning the shots around to avoid slipping and falling.

4. Regularly check the rubber belt and belt of the elevator to avoid deviating.

5. Never to open the workpiece feeding door unless the machine stop completely to avoid accident.

6. Frequently check the end plate of the blasting chamber and the wearable parts of the blasting wheel. To change the badly worn parts in time.

7. The machine must be lubricated periodical to guarantee flexible rotating.

8. regularly check and clean the drive section of the machine, change the badly worn parts.

Buying Leads:
If you are interested in our machine,please kindly inform us the following items:

1. The name of your workpiece?( such as: iron casting parts, Aluminium auto parts etc.)
2. The purpose of the blasting?(rust removal or others?)
3. The size range of the workpiece?( max size and min size)
4. The weight of the workpiece? (max weight and min.weight)
5. The cleaning capacity per day/month?
6. Any other technical requirement?