Delivery Time:45 Days
Certification:Qualified

Wheel Blaster Tumble shot blasting machine for Small Castings

Tumble Shot Blasting Machine Description

Rubber tracked type shot blasting machine is a small shot blasting cleaning equipment, mainly by the room the shotblast cleaning, shot blasting machine assembly, hoisting machine, separator, shot blasting machine electrical system and other accessories.
It is suitable for small and medium sized castings, forgings, stampings, the gear, spring and other parts of deoxidization, rust removal, remove scale and surface strengthening, are especially suitable for the cleaning of parts and reinforcement.

Structure of Tumble Shot Blasting Machine

Items	The main parts
Blasting Chamber	Chamber cover, liners, end plate, manual door, etc
Blasting Wheel	Blasting Wheel, Motor, Pulley, Triangle Belt, Base Plate, Etc
Elevator System	Cover, Elevator Belt Assembly, Pulley, Drive, Tight Device, Etc
Separator System	Separator, Shot Bucket, Etc
Screw conveyor	Screw shaft, blades, bearing base, etc
Belt System	Rubber belt, drive shaft and driven shaft, tight shaft, drive system, etc
Pneumatic System For Shot	Shot gate, cylinder, shot- slip pipe, air processor, etc
Electronic Control System	Control cabinet (conventional electronic control), the second line, etc
Dust Collector System	Bag type dust collector , sedimentation tank, piping, blower, etc

Tumble Shot Blasting Machine Advantage

1. Special thin and small workpieces can be also processed.

Shot blasting room with unique structure can clean and process the common casting and forging workpieces.Even very small and thin pieces can be handled without any damage.

2. Input and discharge simply and accurately.

For the smooth movement,the workpieces will not be hurted.It can be moderately and completely inputted and discharged, easy to be operated.

3. Simple maintenance

Simple structures of drum and the body can reduce damage to this machine,so that can save time and cost for maintenance.

Working principle

1. Reducer drives the loading crane to load the work-piece hopper and sends the work-pieces into the cleaning room.

2. The shots come out from abrasive impeller and blast on the work-pieces.

3. The shots and waste sands goes into the hoister and be sent to the splitter for separating.

4. The splitted clean shots collected by shot circulating device and go into the abrasive impeller for shotting work.

5. The waste sands goes out from waste pipe.

6. The dust sucked by blower and be sent to dust catcher, filtering clean air out and the dust to the dust collecting box which needed to be cleaned regularly.

Range of Application

1. Desanding and decoring of iron, bronze and light metal castings

2. Descaling of forged metal parts, and heat treated components

3. Deburring of metallic and non-metallic parts

4. Forced but gentle turning and tumbling of the parts for all-round shot impingement

5. Targeted high performance shot blasting for specific applications

6. Continuous and thorough shot removal

Notice and Maintenence

1. Regularly cleaning the collect box of the dust collector to protect the dust removing pipe from blacking.

2. Cleaning the bottom of the blasting room and the separator frequently.

3. Often cleaning the shots around to avoid slipping and falling.

4. Regularly check the rubber belt and belt of the elevator to avoid deviating.

5. Never to open the workpiece feeding door unless the machine stop completely to avoid accident.

6. Frequently check the end plate of the blasting chamber and the wearable parts of the blasting wheel. To change the badly worn parts in time.

7. The machine must be lubricated periodical to guarantee flexible rotating.

8. regularly check and clean the drive section of the machine, change the badly worn parts.

Our service:

1. Reply your inquiry in 24 hours.

2. Experienced staffs answer all your questions in time.

3. Customized design is available.

4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.

5. Special discount and protection of sales are provided to our distributor.

6. Professional factory: We are manufacturer, specializing in producing all kinds of Shot Blasting Machine & Molding Machin