Beauty Equipment Portable Low Price q switch nd yag tattoo removal laser machine

with salon use laser device

Theory:

ND: YAG Laser Cosmetic System introduces gem-adjusting Qswitch, which uses high energy by instant emission of laser beam to crush andremove the pigment effectively in the pathologically changed tissues. That isan explosion led by laser beam: the laser beam at the fixed wavelength enabledby the accumulated high energy can reach the pathologically changed tissuesthrough epidermis in a very short time (only 6 ns) to instantly crush therespective color base, then the corresponding pigment group gets swollen andoutburst at last due to high energy, and part of the pigment group springs outof the human body (at shallow epidermis), and the rest (at basis tissues)pigment group will become very small particle before swallowed by the humancell which will be finally discharged out of the human body through lymphaticsystem circulation. The pigment of the pathological tissues will fade in colortill it vanishes. And the surrounding normal tissues will not be ruined sincethey will not absorb the laser at that fixed wavelength .

Application:

The system gem-adjusting Q switch can effectively curethe mixed pigments by pigment precipitation of extraneous source withpathological pigment change of endogenous source, inclusive of erroneous darkeyebrow-embroidery, lip-embroidery, lip-soak, eye line-embroidery, lip-line,tattoo (inclusive of tattoo by extraneous wounds), pigment precipitation bysensitive source, freckle on female's face (male's), coffee spot, old agespot, black mole, and birthmark in black, blue, purple, brown, red and etc.Treatment course for different illness case as follows:

(1)Treatmentfor tattoo in eyebrow
Customer could not open eyes during treatment, operator should adjust energyaccording to depth of tattoo color, hold the handle and move it to treatmentarea slowly to make customer feel acceptable in mentally. Right now, the speedof flash could be set 3HZ, keep head of the handle a two-finger distance totreatment area, start treatment from head of eyebrow to end of eyebrow. It isneeded to treat again in 5-10 minutes if the color of tattoo re-appear.

(2)Removeeye line
The speed of flashes could be set 4-5HZ,adjust the energy of light to minimumenergy, keep a one-finger distance between head of handle and treatment area.Operator should strictly protect customers` eyes with panel for eyelid ormedical pledget (panel for eyelid)of 25px depth.
Treatment should be started from down eye line, customer should deeply closeeyes and keep eyeball up-sight inside. Operator should press the pledget (panelfor eyelid) with forefinger and push up eyelid, peel down eyelid with middlefinger to bare the eye line, treat it with flashes of 4-5Hz. Then, treat up eyeline. Also customer should close eyes and keep eyeball down-sight inside.Operator should press the pledget (panel for eyelid) with middle finger andpush eyelid down, push eyelid up with forefinger to bare the eye line, treat itwith flashes of 4-5Hz.

(3)Removelip line
The speed of flashes could be set 5Hz,keep a 3/4 finger distance between headof handle and treatment area. It is better to remove black, coffee, deep, redand brown lip line with 1064nm head at first time and then, treat again with532 nm head.
Notice: All tattoos in lip should be treated in 6 months after making. ORremoval treatment will fail. It should have 45-60 days interval to continuenext treatment until remove all.

(4)Removetattoo
The speed of flashes could be set 3Hz/5Hz.It is better to use high energy fortreatment until treatment area seeps a little blood. It should have 45-90 daysinterval to continue next treatment until remove all.

(5)Removespot and nevus
The speed of flashes could be set 3Hz/5Hz.Keep 3-4 fingers distance betweenhead of handle and treatment area. It is better to use high energy fortreatment until treatment area seeps a little blood. It is advised to use 1064nm head for normal spot and nevus treatment, but for deep color spot and nevus,it is better to use 532nm head for treatment. It should have a 15-30daysinterval to continue next treatment until remove all.

(6)Removebirthmark
The speed of flashes could be set 3Hz/5Hz.It is better to use high energy fortreatment until treatment area seeps a little blood. It is advised to use1064nm head for birthmark treatment, but for red and deep color birthmark, itis better to use 532nm head for treatment. It should have 45-90 days intervalto continue

BD-LS (Black doll )wavelength tip: whitening ,shrinking pore , remove acne,remove blackhead.

 YAG laser tattoo removal machine features:

1.Portable YAG laser tehnique
2.without anesthesia
3.without damaging normal skin
4.easy maintenance
5.without damaging normal skin

6. 1064nm can get rid of eye line, eyebrowline, lip line, tattoo, speckle (black, blue, etc.)
532nm can get rid of eyebrow line, eye line, lip line,tattoo, speckle, titian nevus (red, brown, etc.) and capillaryvessel    dilatation

7. The highest configuration in smallQ-switch ND:YAG lasers

8. Color touch screen with independenttreatment functions, much easier operation

9. Plug-and-play handle, simple installation

10. No side effect, no scar, no down time

 Before and later:

Free training: for operation of the machine in our company, which provided by our specialized training department.

On-line services: for example, technical consultancies provided by our skilled technique group concerning any question of the laser machine, and after-sale maintenance and more.

OEM/ODM services: are available. We have our own developing and design department and manufacturing line, which ensure your required beauty machine.

Quality guarantee:One year

Our After-sales Service:

1.1 year warranty with professional support

2.Within 1 year, Supply spare parts for free if the machine has quality problem

Dear,if you have any question ,welcome to contact us !!