2016 Best Price Fractional Co2 Laser Equipment Wrinkle/scar/acne 8.0 Inch Removal 10600 Nm Laser Co2 Fractional Wrinkle Removal
USD $1 - $2 /Piece
Min.Order:1 Piece
Guangzhou Realtop Beauty Equipment Co., Ltd.
Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
2016 Best price fractional co2 laser equipment wrinkle/scar/acne
removal 10600 nm laser co2 fractional
Principle:
Fractional photo thermolysis creates an array of microscopic thermal wounds, called microscopic treatment
zones, at specific depths. Unlike other ablative and nonablative lasers, which produce layers of thermal
heating, the FP creates microscopic columns of thermal damage, sparing surrounding tissues and
promoting more rapid healing. The FP treatment results which are collagen remodeling and skin turnover
are excellent. Removing lentigines and other discolorations and producing fresher, tighter, and more
youthful skin could be little to no downtime.
Applications:
1. Reduce lines and deep wrinkles on the face
2. Tighten skin on the face and neck
3. Improve skin tone around eyelids, jowls and neck
4. Rejuvenate sun-damaged skin and improve texture
5. Remove pigmented lesions
6. Improve tone and texture on the chest, arms, and hands
7. Change the appearance of scars.
Advantages:
1. scan mirror:made in Germany, so the accuracy of the treatment is very good, the speed is fast, then the
treatment is very good.
2. guide light arm: 7 joint articulated arm, high quality, accuracy is great.
3. company only 500HZ/s. so the energy is high, treatment speed is fast, skin damage is small.
4. spot diameter is small, so the treatment spot is small, wound area is small, recover much faster.
5. every spot is same, include the depth, size, and no miss spot in the treatment area, shape is not any
distortion. other company's spot are not same size and same depth.
6. speed is more than 10m/s, so the thermal damage is small, and less pain.
7. density, depth, and shape, all can be adjusted, very convenient.
8. scan models: free scan, sequence scan, maximum distance scan, free scan and maximum distance scan
technology, diffuse the heat of adjacent organizations, not form heat buildup, reduce thermal damage and
reduce the various complications.
9. four treatment heads, can be used for different treatment, very convenient.
CO2 laser system
The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.
The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.
10. 7 different scan shape, adapt to different customer`s request.
11. distance: 0.1mm-2.6mm, lots of other company only reach 2mm.
12. power: 30W, but lots of company only 12W, 15W.
Specifications:
Wavelength:10600nm
Laser apparatus:Sealed off laser device simulated by direct current
Optical beam quality:TEM00
Output power:30w
Spot size:0.02~0.05mm2
Aiming beam:Red semiconductor laser (635nm, less than 5mw)
Beam transport device:Articulated arm with 7-joint and balance weight
Working mode:Continuous operation
Output Mode:Continuous, single pulse, interval pulse and super pulse
Scan scope:Max 20mmx20mm
Scan graphics:Circle, triangle, square, rectangle,hexagon, ellipse, line
Scanning Mode:Random , Normal and Midsplit scan
Scanning speed:More than 10m/s
Energy:1- 30W
Pulse width:0.1-5.0ms
Distance:0.1-2.6mm
Input power:450VA
Cooling system:Water and air circulation
Environment temperature:5°C~40°C
Relative humidity:Less than 80%
Power:110V / 220V
Application:
1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.
2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc
Free Training for operation of the machine in our company, which provided by our specialized training department.
On-line Services, for example, technical consultancies provided by our skilled technique group concerning any question of the laser machine, and after-sale maintenance and more.
OEM/ODM Services are available. We have our own developing and design department and manufacturing line, which ensure your required beauty machine.
Quality Guarantee:One year
Our After-sales Service:
1.1 year warranty with professional support
2.Within 1 year, Supply spare parts for free if the machine has quality problem
Dear,if you have any question ,welcome to contact us !!
Theory - co2 fractional laser