Brief Introduction

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

Brief Introduction

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

2016 Best laser equipment co2 fractional laser machine wrinkle/scar/acne removal

10600 nm laser co2 fractional

Principle:

Fractional photo thermolysis creates an array of microscopic thermal wounds, called microscopic treatment

zones, at specific depths. Unlike other ablative and nonablative lasers, which produce layers of thermal

heating, the FP creates microscopic columns of thermal damage, sparing surrounding tissues and

promoting more rapid healing. The FP treatment results which are collagen remodeling and skin turnover

are excellent. Removing lentigines and other discolorations and producing fresher, tighter, and more

youthful skin could be little to no downtime.

Applications:

1. Reduce lines and deep wrinkles on the face

2. Tighten skin on the face and neck

3. Improve skin tone around eyelids, jowls and neck

4. Rejuvenate sun-damaged skin and improve texture

5. Remove pigmented lesions

6. Improve tone and texture on the chest, arms, and hands

7. Change the appearance of scars.

Advantages:

1. scan mirror:made in Germany, so the accuracy of the treatment is very good, the speed is fast, then the

treatment is very good.

2. guide light arm: 7 joint articulated arm, high quality, accuracy is great.

3. company only 500HZ/s. so the energy is high, treatment speed is fast, skin damage is small.

4. spot diameter is small, so the treatment spot is small, wound area is small, recover much faster.

5. every spot is same, include the depth, size, and no miss spot in the treatment area, shape is not any

distortion. other company's spot are not same size and same depth.

6. speed is more than 10m/s, so the thermal damage is small, and less pain.

7. density, depth, and shape, all can be adjusted, very convenient.

8. scan models: free scan, sequence scan, maximum distance scan, free scan and maximum distance scan

technology, diffuse the heat of adjacent organizations, not form heat buildup, reduce thermal damage and

reduce the various complications.

9. four treatment heads, can be used for different treatment, very convenient.

10. 7 different scan shape, adapt to different customer`s request.

1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2. 
   

11. distance: 0.1mm-2.6mm, lots of other company only reach 2mm.

1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2. 
   

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

12. power: 30W, but lots of company only 12W, 15W.

Specifications:

Wavelength:10600nm

 Laser apparatus:Sealed off laser device simulated by direct current

 Optical beam quality:TEM00

 Output power:30w

 Spot size:0.02~0.05mm2

 Aiming beam:Red semiconductor laser (635nm, less than 5mw)

 Beam transport device:Articulated arm with 7-joint and balance weight

 Working mode:Continuous operation

 Output Mode:Continuous, single pulse, interval pulse and super pulse

 Scan scope:Max 20mmx20mm

 Scan graphics:Circle, triangle, square, rectangle,hexagon, ellipse, line

 Scanning Mode:Random , Normal and Midsplit scan

 Scanning speed:More than 10m/s

 Energy:1- 30W

 Pulse width:0.1-5.0ms

 Distance:0.1-2.6mm

 Input power:450VA

 Cooling system:Water and air circulation

 Environment temperature:5°C~40°C

 Relative humidity:Less than 80%

 Power:110V / 220V

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

1. How do I know if I need CO2 laser? 

Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.

2. What benefits can I expect? 

Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking

3. Is there another way to get the same effect? 

Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.

1. How do I know if I need CO2 laser? 

Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.

2. What benefits can I expect? 

Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking

3. Is there another way to get the same effect? 

Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.