Specifications

1.Appearance: Clear amber liquid
2.Composition: Cellulytic enzymes
3.Solubility: Miscible with water
4.Dose rate: 0.1 - 0.5%

BENEFITS

  

  *  High-concentrated product. 
  *  Use with/without pumice stone thus reducing machine damage 
  *  Easy to apply via liquid feed systems. 
  *  Easy for dilution 
   
INTRODUCTION   
   
DENYPILL P99C is a stabilised acid cellulytic enzyme for stonewashing of cellulose based garments and fabrics.   
It gives high abrasion and best depilling.   
   
TEMPERATURE PROFILE   
   
The temperature range of DENYPILL P99C is wide, the optimum temperature is 55°C.  Again, this wide range of    
temperature, coupled with the broad pH makes the neutral range extremely user friendly.   
   
   
pH PROFILE   
   
DENYPILL P99C has a broad pH and temperature range.  The pH activity range is from 4.0 - 5.5 with minimal drop in  activity.  The broad band allows this product to perform well in a variety of local conditions.   
   
   
DIRECTIONS FOR USE   
   
Add DENYPILL P99C to the process in accordance with production instructions.  For optimum performance, use   
the following operational parameters: 

Temperature:   Commence at 40-55°C(Depend your requirement) 
Dose rate:   0.1 - 0.5% on weight of garment depending on finish required 
Time:   15 - 60 minutes 
pH:   4.5 - 5.5 (set by external buffer system) 
Liquor ratio:   4:1 - 10:1 
    
    
TECHNICAL DATA (typical)    
    
Appearance:   Clear amber liquid 
Composition:   Cellulytic enzymes 
                            Stabilisers 
pH:   4.5 - 5.0 
Solubility:   Miscible with water 
Storage:   Store in dry and temperate conditions (5 - 30°C) 

 

 

TECHNICAL SERVICE 
 
The DENYKEM team of technical advisors is backed up by full scale production and extensive research and  
development facilities. 
 
 
These conditions are only given as a guide.  Tests should be carried out under local conditions to ascertain the optimum dosage for the machine type,fabric source and water conditions.