Specifications

1. Appearance: A aqueous liquid
2. Optimum pH Range: 6 - 8
3. Solubility: Fully soluble in water
4. Brand: Denykem

BENEFITS  

 

  *  Minimises re-deposition during desizing and abrasion cycles.   
  *  Powerful surfactant especially formulated for    
     Especially for polyester / polycotton blends.    
     
INTRODUCTION     
      
DENYDET PC-2PLUS is a special surfactant.  It is specifically designed to clean polyester     
and polycotton blends during and after desizing and stonewashing.     
it is bias cleaner for polyester or labels/emboroidery and pockets.     
     
DETERGENCY     

Detergency is the degree to which fatty and particulate soil is initially removed.  The redeposition is determined by
washing clean and soiled fabric together several times.The whiteness of the "clean" fabric is then measured using a reflectance spectrophotemer. The graph shows the reduction in redeposition when garments are washed with DENYDET PC-2PLUS

.

 

DIRECTIONS FOR USE   
   
Add DENYDET PC-2PLUS to the process in accordance with production instructions.  For    
optimum  performance,use the following parameters.   
   
Temperature:   40 - 60°C  (Also works well at 25°C)
Dose rate:   0.5- 5 g/l
Time:   10 - 60 minutes
Optimum pH:   6 - 8 (Also works with Acid Cellulase at pH 5.0).
   
TECHNICAL DATA (typical)   
   
Appearance:   A aqueous liquid
Composition:   Non-ionic surfactant
Solubility:   Fully soluble in water
Storage:   Store in dry and temperate conditions (5 - 35°C)
   

TECHNICAL SERVICE

The DENYKEM team of technical advisors is backed up by full scale production and extensive research and
development facilities.

These conditions are only given as a guide. Tests should be carried out under local conditions to ascertain the optimum dosage for the machine type,fabric source and water conditions.