Stonewashing Enzymes
Negotiable
Min.Order:1
BENEFITS
* Fully formulated product.
* Use with or without pumice stone thus reducing machine damage
* Built-in buffer system controls pH.
* Powerful Surfactant system minimises re-deposition on a range
of fabrics.
INTRODUCTION
DK 463 SPWD is formulated neutral cellulase preparation, it designed for use with or without pumice stone to give maximum abrasion with minimum damage during the treatment of denim garments.
DK 463 SPWD gives strong bio-stoning efffect and sharp abrasion with greyish shade.it offers low indigo backstaining and hig contrast of the denim to the finisher.
TEMPERATURE PROFILE
The temperature range of the Neutral products is also wide, the optimum temperature is 50°C, however, the
products will perform at 25°C. Again, this wide range of temperature, coupled with the broad pH makes the
Neutral range extremely User Friendly.
pH PROFILE
Denykem's neutral enzyme has a broad pH and temperature range. The pH activity range of Ultima
products is from 5.5 to 7.9 with minimal drop in activity. However, it is Denykem's recommendation that the
products be used between pH 6 and 7.5. This broad band allows the Neutral cellulase to perform in a variety
of local conditions. The broad range, as well as a strong buffer system, overcomes internal deviations in pH.
DIRECTIONS FOR USE
Add DK 463 SPWD to the process in accordance with production instructions. For optimum performance,
use the following operational parameters:
Temperature: Commence at 55°C and allow to cool during the process.
Time: 25 - 90 minutes
pH: 6.0 - 7.5 (set by in built buffer system)
Liquor ratio: 4:1 to 10:1
TECHNICAL DATA (typical)
Appearance: Formulated powder
Composition: Cellulytic enzyme(β-1,4--endoglucanase)
Non-ionic surfactants
Inorganic/organic acid buffer system
pH: 6 - 7 (set by in-built buffer system)
Activity: 839.04DAU/G(according denykem® unit)
Cas N0: 9012-54-8
IUD-N0: EC 3.2.1.4
Solubility: Soluble in water
Packing: 40kilos cardboard drum
Storage: Store in dry and temperate conditions (5 - 35°C)
TECHNICAL SERVICE
The DENYKEM® team of technical advisors is backed up by full scale production and extensive research and
development facilities.
These conditions are only given as a guide. Tests should be carried out under local conditions to ascertain the optimum dosage for the machine type,fabric source and water conditions.