Specifications

1. Appearance: Straw yellow liquid
2. Optimum pH Range: 7 - 8
3. Solubility: Fully soluble in water
4. Brand: Denykem

BENEFITS  

 

  *  Minimises re-deposition during desizing and abrasion cycles.
  *  Powerful surfactant especially formulated for
     polyester / polycotton blends.
  
INTRODUCTION  
   
DENYDET CL2 is a special surfactant.  It is specifically designed to clean polyester  
and polycotton blends during and after desizing and stonewashing.  
  
  
DETERGENCY  
  
Detergency is the degree to which fatty  and particulate soil is initially removed.  The redeposition is determined by   
washing clean and soiled fabric together several times.  The whiteness of the "clean" fabric is then measured using a reflectance spectrophotemer.  The graph shows the reduction in  redeposition when garments are washed  with DENYDET CL2.  

 

 

DIRECTIONS FOR USE   
   
Add DENYDET CL2 to the process in accordance with production instructions.  For optimum    
 performance,use the following parameters.   
   
Temperature:   40 - 60°C  (Also works well at 25°C)
Dose rate:   1 - 5 g/l
Time:   10 - 60 minutes
Optimum pH:   7 - 8 (Also works with Acid Cellulase at pH 5.0).
   
   
TECHNICAL DATA (typical)   
   
Appearance:   Straw yellow liquid
Composition:   Non-ionic surfactant
Solubility:   Fully soluble in water
Storage:   Store in dry and temperate conditions (5 - 35°C)
   
   
TECHNICAL SERVICE   
   
The DENYKEM team of technical advisors is backed up by full scale production and extensive research and    
development facilities.   
   
These conditions are only given as a guide.  Tests should be carried out under local conditions to ascertain the optimum dosage for the machine type, fabric source and water conditions.