3.Rated Load:6W                    4.Detection Distance:6m 

5.Time Delay:120sec 

SPECIFICATION:

FUNCTION:

• Can identify day and night: The original setting in LUX is less than 20LUX. It only works in this environment (<20lux), such as dusk or evening .In daylight, it will stop working.
• Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic.(setting time is 60sec)

INSTALLATION:

• Switch off the power;
• Connect the sensor lamp with E27 lamp holder.

TEST:

• Before the testing, make sure the working ambient is less than 20LUX
• When you switch on the power, the sensor lamp doesn’t work at once. It needs to preheat 30 seconds. When the lamp gets the induction signal, it will be turned on. After the lamp is turned off, it will be turned on again when the sensor gets induction signal within 5~15 sec.
• After the first induction, the lamp will make sense again 5~10sec later. The load should work. When there is no induction signals in the sensor, the lamp stops working;

Note: when testing in daylight (more than 20LUX), the sensor lamp will not work!

Detail Picture of ES-B04 LED 6W Motion Sensor bulb lamp E27 light socket !